Thanks for the Deoxit tip! I have a Casio VL-Tone that has two scratchy sliders but is otherwise pretty perfect for a 43-year-old device, may give that needle bottle a shot.
On Fri, Jul 16, 2021, 22:56 Greg Swallow <gswal...@mchsi.com> wrote: > Hey Earl, > > Welcome to the list. > > Deoxit on the pot. Amazon has it in a "precision" dropper here: > https://www.amazon.com/dp/B0000YH6F8/ref=cm_sw_r_cp_apa_glt_fabc_HYHBJZ4YAQW7PX7RC30P > > Greg @ arcadeshopper.com has most parts you'll need. Including complete > re-cap kits. Just picked up a couple kits with a replacement TPDD2 belt > myself. > > God Bless, > > GregS <>< > > Jul 16, 2021 5:03:08 PM Earl Baugh <e...@baugh.org>: > > > Howdy! > > > > I’m new to the list and recently picked up a model 100 that needed some > restoration. A friend helped me get the bad caps replaced, cleaned the > power plug and we diagnosed a bad member switch and bad pot for the lcd > contrast adjustment. It’s working again (hurrah), with a solder bridge on > the switch and some resistors temporarily in place of the pot. ( we also > removed the battery before any leakage or damage ) > > > > Is there anyplace where I can get replacement parts for the pot and > switch without digging thru a Mouser or Digikey catalog? ( or the part > numbers at least to save a number of mis orders? 😊) > > > > Earl > > > > > > Sent from my iPhone >