Cool can you share the part

On Wed, Apr 19, 2023, 11:35 AM David Plass <dpl...@alum.mit.edu> wrote:

> To answer my own questoin _again_, about half the function keys were
> toast, but they seem to be a standard part (!) so I was able to order some
> replacements.
>
> On Mon, Apr 17, 2023 at 9:00 PM David Plass <dpl...@alum.mit.edu> wrote:
>
>> Thanks.
>>
>> To answer my own question, the 1N4148 diodes worked perfectly. All the
>> regular keys are working. The function keys, not so much. I've squirted
>> lots of electronics cleaner and clicked each switch dozens of times and
>> only a few of the 7 or so broken switches have come back. Right now I
>> dripped some vinegar inside to hopefully break up whatever corrosion might
>> be inside...
>>
>> On Sun, Apr 16, 2023 at 7:45 PM Brad Grier <b...@bradgrier.com> wrote:
>>
>>> RE: the polarizing film -- Jeff Birt (on this list) suggested
>>> https://3dlens.com/
>>>
>>> I have some, just haven't got to my project that needs it yet :D and
>>> with the onset of spring, that one may sit for a bit.
>>>
>>> --Brad
>>>
>>> On Sun, Apr 16, 2023 at 2:10 PM David Plass <dpl...@alum.mit.edu> wrote:
>>>
>>>> I couldn't resist a recent M100 on ebay listed as "not working". The
>>>> main issue was a dead contrast pot, which I have temporarily worked around
>>>> and ordered a hacky replacement.
>>>>
>>>> The polarizing film is also very bubbly and no amount of smoothing made
>>>> it stay flat on the LCD. Is there a known replacement for the film?
>>>>
>>>> Most importantly, I noticed about a half dozen non-functional keys.
>>>> After disassembly I discovered corrosion on their diodes. Upon closer
>>>> "inspection", said diodes disintegrated.
>>>>
>>>> So my second question is: Is there a particular diode I should replace
>>>> them with? I have tons of 1N4148s, which look like a match (and
>>>> electrically drop about the same voltage), but I can't find a spec for
>>>> those diodes on the m100 schematics.
>>>>
>>>> Thanks
>>>> -David
>>>>
>>>>
>>>>
>>>
>>> --
>>> --
>>> Brad Grier
>>>
>>>
>>>

Reply via email to