Not much to say really. I decided it would be a fun challenge to carefully measure out the M100 sockets and NEC sockets to see if I could have a single card that spans all 3 (or 4 in the case of NEC) ram slots with a single ram chip. It works, and it saves a bit of money if you need a bunch of 8k rams. Bit of a pain to make though. I have to pick apart pin headers to get the pins, and then hand place 40 pins in a jig, and then wiggle the board into place and solder.
I have enough M100's that have only 8k, and several NEC with no bank 2 RAM, I decided to finish the project off, and flood my machines with ram. Since then I decided I would offer it if there was interest. Never was intended to be DIY. regards. Steve On Tue, Apr 25, 2023 at 9:45 PM Mike Stein <mhs.st...@gmail.com> wrote: > I didn't know there was a 24K RAM card for the M100; any details on that? > > m > > > On Tue, Apr 25, 2023 at 9:17 PM Stephen Adolph <twospru...@gmail.com> > wrote: > >> >> http://bitchin100.com/wiki/index.php?title=Ordering_Information >> >> Mark, those 2 items are things you can order from me. >> >> Steve >> >> >> On Tuesday, April 25, 2023, mark audacity romberg <mark.romb...@gmail.com> >> wrote: >> >>> Say y’all, I don’t have a login on the Bitchin 100 Wiki to comment >>> there, but both the 8k and 24k DIY RAM board articles have no actual >>> actionable information—no schematics, no links, no PCB art, nothing but a >>> photo of the 8k, and a photo of the prototype installed for the 24k. >>> >>> Needless to say…these are not useful. Could we either get the folks who >>> created those projects to post the rest of the information/files, or remove >>> the articles, since they essentially are stories, not projects? >>> >>> —m.a >> >>
