Yeah, i know, but in my case, server is already deployed, and there are we have some services, so i just trying to not lose it all.
> 2 нояб. 2017 г., в 18:32, Andres Rodriguez <[email protected]> > написал(а): > > If this machine has not been deployed, you can re-commission the machine. > This will allow MAAS to automatically discover the interface the machine is > PXE booting from and, once you deploy it, it will auto-assign an IP address > to that specific interface. > > On Thu, Nov 2, 2017 at 11:30 AM, Vladimir Burlakov <[email protected] > <mailto:[email protected]>> wrote: > Hi Andres. > Sorry, it seems i forgot that maas is statically configure ip on deployment > interface. > So, it seem simple now, first i should move a wire from eth0 -> eth1, enable > pxe on eth1, then > reconfigure interfaces via /etc/network/interfaces file. > So, i’ll check shortly, and will share the results. > > Thanks, > Vladimir Burlakov > >> 2 нояб. 2017 г., в 17:46, Andres Rodriguez <[email protected] >> <mailto:[email protected]>> написал(а): >> >> Hi Vladimir, >> >> The deployment interface is based on which interface your machine PXE boots >> on (which is controlled by the BIOS). If your machine is PXE booting on >> eth0, then this is why this is used for the deployment process. >> >> That said, how's your environment configured? Are both interfaces connected >> to the same VLAN ? If both are, then what you need to do is to ensure your >> BIOS uses eth1 as the PXE interface. >> >> If you have them in separate VLANs, are you only enabling DHCP on the vlan >> connected to eth1 or on both? Depending on which one you may need to >> configure your BIOS accordingly. >> >> >> Hope this helps. >> >> On Thu, Nov 2, 2017 at 9:32 AM, Vladimir Burlakov <[email protected] >> <mailto:[email protected]>> wrote: >> Hello everyone. >> I have a question.. can i change deployment interface to other, after deploy >> the server. >> f.e. server has 2 interfaces eth0, eth1, and we added-deployed this server >> in maas >> via eth0, but now we need to move all the conversation between maas and >> server to eth1, >> to free eth0, could you tell, how it can be done? >> >> Thanks, >> Vladimir Burlakov >> -- >> Maas-devel mailing list >> [email protected] <mailto:[email protected]> >> Modify settings or unsubscribe at: >> https://lists.ubuntu.com/mailman/listinfo/maas-devel >> <https://lists.ubuntu.com/mailman/listinfo/maas-devel> >> >> >> >> -- >> Andres Rodriguez >> Engineering Manager, MAAS >> Canonical USA, Inc. > > > > > -- > Andres Rodriguez > Engineering Manager, MAAS > Canonical USA, Inc.
-- Maas-devel mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/maas-devel
