Ok, it’s done and looks good. Just one thing, i think, now, after the changes, it’s not possible to update interfaces page in a maas gui, isn’t it ? Anyway, thank for help Andres!
> 2 нояб. 2017 г., в 18:34, Vladimir Burlakov <[email protected]> написал(а): > > Yeah, i know, but in my case, server is already deployed, and there are we > have some services, so i just trying to not lose it all. > > >> 2 нояб. 2017 г., в 18:32, Andres Rodriguez <[email protected] >> <mailto:[email protected]>> написал(а): >> >> If this machine has not been deployed, you can re-commission the machine. >> This will allow MAAS to automatically discover the interface the machine is >> PXE booting from and, once you deploy it, it will auto-assign an IP address >> to that specific interface. >> >> On Thu, Nov 2, 2017 at 11:30 AM, Vladimir Burlakov <[email protected] >> <mailto:[email protected]>> wrote: >> Hi Andres. >> Sorry, it seems i forgot that maas is statically configure ip on deployment >> interface. >> So, it seem simple now, first i should move a wire from eth0 -> eth1, enable >> pxe on eth1, then >> reconfigure interfaces via /etc/network/interfaces file. >> So, i’ll check shortly, and will share the results. >> >> Thanks, >> Vladimir Burlakov >> >>> 2 нояб. 2017 г., в 17:46, Andres Rodriguez <[email protected] >>> <mailto:[email protected]>> написал(а): >>> >>> Hi Vladimir, >>> >>> The deployment interface is based on which interface your machine PXE boots >>> on (which is controlled by the BIOS). If your machine is PXE booting on >>> eth0, then this is why this is used for the deployment process. >>> >>> That said, how's your environment configured? Are both interfaces connected >>> to the same VLAN ? If both are, then what you need to do is to ensure your >>> BIOS uses eth1 as the PXE interface. >>> >>> If you have them in separate VLANs, are you only enabling DHCP on the vlan >>> connected to eth1 or on both? Depending on which one you may need to >>> configure your BIOS accordingly. >>> >>> >>> Hope this helps. >>> >>> On Thu, Nov 2, 2017 at 9:32 AM, Vladimir Burlakov <[email protected] >>> <mailto:[email protected]>> wrote: >>> Hello everyone. >>> I have a question.. can i change deployment interface to other, after >>> deploy the server. >>> f.e. server has 2 interfaces eth0, eth1, and we added-deployed this server >>> in maas >>> via eth0, but now we need to move all the conversation between maas and >>> server to eth1, >>> to free eth0, could you tell, how it can be done? >>> >>> Thanks, >>> Vladimir Burlakov >>> -- >>> Maas-devel mailing list >>> [email protected] <mailto:[email protected]> >>> Modify settings or unsubscribe at: >>> https://lists.ubuntu.com/mailman/listinfo/maas-devel >>> <https://lists.ubuntu.com/mailman/listinfo/maas-devel> >>> >>> >>> >>> -- >>> Andres Rodriguez >>> Engineering Manager, MAAS >>> Canonical USA, Inc. >> >> >> >> >> -- >> Andres Rodriguez >> Engineering Manager, MAAS >> Canonical USA, Inc. >
-- Maas-devel mailing list [email protected] Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/maas-devel
