On 6 Dec 2007, at 21:13, Alex Thurgood wrote:
Shaun McDonald a écrit :
Hi Shaun,
I have heard that there is a permissions issue.
please run ls -l soffice swriter scalc <etc.> and post the results.
Shaun
Well I already did that and noticed that they were all rw-r-r, so I
8-)
tried changing them through the Tiger UI with Cmd-i, but you can only
set the read/write bits, and not execute (talk about a dumb limitation
or what ?).
Try doing
chmod a+x soffice
that will set the execute bit
You cannot set the execute bit from the finder.
I assume I have to set these bits in octal mode from the
console, but which one ? When I compare these to the bits set on the
2.3.1 installation, the scripts are all read only for the user, and
yet
they work fine.
BTW, this problem didn't exist for m237.
http://www.openoffice.org/issues/show_bug.cgi?id=84162
Shaun
Alex
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
--
Shaun McDonald
http://shaunmcdonald.me.uk/
http://www.manager-pro.com/en/
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
