Don't see any major problems Bas , the 7i76 cards work flawlessly , using pc's inside electrical control cabnets are fine , just take the usual precautions if there are any high voltages or high amperage switches , relays etc
i.e keeping low voltage wiring seperate from mains or high currents , I have been using pc's in cabinets for a few years now with machinekit , never had any problems just be mindful if their are any 3 phase chokes or transformers close by , but overall just standard common sense works lol Sarah On Monday, December 19, 2016 at 8:48:25 PM UTC, Bas de Bruijn wrote: > > Hi, > > I’m making a non-cnc type application and would choose Machinekit over a > PLC with motion card. > I hope there are people on this list who have some advice regarding the > choice for hardware. > Especially experiences with PC’s inside an electrical control cabinet > would be most welcome. > > I’d like to use the Mesa 7i76 cards. > > What pitfall (if any) would I need to be aware of for choosing 6i25 or > 5i25 card in combination with the PC. Would this be a viable choice > http://www.logicsupply.com/mc600-10/#specs ? > > Cheers, > Bas > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.