On Thursday, May 11, 2017 at 1:12:49 PM UTC+2, Bas de Bruijn wrote:
>
>
>
> > On 11 May 2017, at 12:36, Marius Alksnys wrote:
> >
> > This might be related to the sequence of component creation at startup.
> >
> > I think you might want to read this thread:
> > QtQuickVcp: how to create an array of HalLed for GPIO?
> > news://
> news.gmane.org:119/7a221e79-d365-44c8-88b1-fd99fce8e...@googlegroups.com
I've read thru the topic you referred. But so far it's a bit hard to
understand for an uninitiated one in QtQuick.
can't seem to grasp the "logic" of QtQuick.
> Thanks Marius, I'll try that.
> Bas
>
> >
> > 05/11/2017 10:45 AM, Bas de Bruijn rašė:
> >> Hi,
> >>
> >> I've been building single QtQuickVCP window UI's in the past, and today
> >> I try to build some tabs into my UI.
> >> I'd like to have a tab with buttons, and a tab with IO's for inspecting
> >> HAL pins. So for this I looked into Machineface and I moved my buttons
> >> and hal pins to a different file.
> >> Frankly I've mostly extended upon examples, and what happpened was
> >> simple to follow but in Machineface I can't seem to find out what's
> >> happening when.
> >>
> >> I have come up with the following setup:
> >> 3 files:
> >> - UI.qml (this is the main app)
> >> - Buttons_tab.qml (now holding what was previously in UI)
> >> - Io_tab.qml
> >>
> >> in UI.qml I've added:
> >> ```
> >> TabView {
> >> id: mainTab
> >> frameVisible: false
> >> anchors.left: toolBar.right
> >> anchors.right: displayPanel.left
> >> anchors.top: parent.top
> >> anchors.bottom: parent.bottom
> >> anchors.rightMargin: Screen.pixelDensity
> >> anchors.leftMargin: Screen.pixelDensity
> >>
> >> Buttons_tab { }
> >> Io_tab { }
> >> }
> >> ```
> >>
> >> When running machinekit-client I get the message in the window after
> >> connecting:
> >>
> >> ```
> >> No error
> >> pin count mismatch:pb comp=1 hal comp=24
> >> ```
> >>
> >> I probably missed something trivial.
> >> Any thoughts or pointers to understanding what I do wrong?
> >>
> >> Cheers,
> >> Bas
> >>
>
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
