Thanks. My error. Reverted to stable kernel (3.8) and all is good. Just starting on my build. So long ways to go
On Saturday, June 24, 2017 at 12:57:41 PM UTC-4, Schooner wrote: > > > On 23/06/17 18:25, Francis Samuel wrote: > > Not sure if the is closed. But I am new too. Mine is BBBA6A and I am using > the latest image 18-06-2017 4.4 > I ssh and when I run Linuxcnc I get the same error rtapi app not running > and it fails. As this is prebuilt I assume SUID in not the cause > Error message is the same as this post. Any help would be appreciated > > > You have quoted a thread in which the problem was resolved. > > If you have the same errors, you need to give us specific info about your > image, which build packages machinekit is based upon etc. > We don't maintain the images and I don't have a BBB, so have no idea what > is in it. > (I was under the impression that the 4.4 rt-preempt kernel did not work > and everyone stuck with the earlier 3.x.x one ?) > > A start would be > dpkg --list | grep machinekit > if the image is based upon a system install from packages rather than a > RIP build > > If based on a RIP build use > git rev-parse --short HEAD > from within the machinekit folder > > > > On Sunday, 19 March 2017 23:17:41 UTC-4, Brian Schousek wrote: >> >> >> I'm trying to get a basic Machinekit up and running on an older PC. I've >> apparently successfully installed and started an RT-PREEMPT kernel (see ref >> 1), properly installed the appropriate machinekit packages (see ref2), and >> tried to start things up with various configurations. Ref 3 shows a >> representative error (through iterations I determined that just trying to >> run 'realtime' yields the same errors as starting the whole package, and >> errors out much quicker.) My interpretation of ref 3 is that it is trying >> to run rtapi_posix (not installed) instead of rt-preempt. As can be seen in >> ref 4 there is an executable for rtapi_app_rt-preempt but no >> rtapi_app_posix so it's no great surprise there is an error in ref 3. >> >> What simple thing am I missing here? I've been unsuccessful in finding a >> solution in this forum and on the machinekit website. >> >> >> >> > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.