Hi Pranav, > On 29 Aug 2017, at 08:08, Pranav Pandey <pranav...@gmail.com> wrote: > > Hi Folks, > > This is my first post on this group. I am working on integrating 3d printing > and CNC Milling in a single machine. I have worked with Arduino Mega before > and have run the machine on the Marlin firmware. > > However I am interested in using the Machine kit platform to run my 3d > printer. My background is Electrical and hence have only basic knowledge > about coding. I would like to know if someone has successfully 3D Printed > using the above setup. If yes, Can you please share some links or procedure > for the same?
There are ample examples of people using Machinekit for 3D printing. So you're covered. Here's something to start with. http://www.machinekit.io/docs/fdm/fdm-gcode/ There are also a few configurations from which you can start. https://github.com/machinekit/machinekit/tree/master/configs/ARM/BeagleBone Shout out if you need help. Bas > > Thanks > Pranav > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to machinekit+unsubscr...@googlegroups.com. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
