Thanks for the reply Bas. I should have provided more details. So I will try to list them here:
1. CRAMPS Configuration 2. Cura 2.1 Version 3. G-Code [Attached below] 4. <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> On Wed, Aug 30, 2017 at 8:04 PM, Bas de Bruijn <b...@basdebruijn.com> wrote: > > > On 30 Aug 2017, at 16:24, Pranav Pandey <pranav...@gmail.com> wrote: > > If you want to simplify your life, and don't mind a remote interface, I >> would go a little different route. >> Axis still sucks on the BBB due to software rendering sucking up most of >> the CPU. The solution to that is use a remote interface. The one for 3D >> printing is 'Machineface'. >> That and the trajectory planner doesn't work as well with > 3 axis. The >> solution to that is 'velocity extrusion'. There is no E then, so 3 axis >> will do it. >> > > Thanks for this ! > > >> Start here: >> http://machinekoder.com/machinekit-and-cura/ for integrating cura. It's >> a plugin to directly produce the ngc files from cura which velocity >> extrusion uses. >> The reason you are getting the errors is differences in what the slicers >> output compared to real gcode. They break some rules from real gcode, and >> add some things. >> > > I tried integrating Cura plugin but am still encountering M code errors. > :( > > >> Here is a config made for Machineface and velocity extrusion. >> https://github.com/machinekoder/Fabrikator-Mini-CRAMPS >> This has been integrated into machinekit though, so you'll find it in >> configs, and it's built for CRAMPS too I believe. >> > > The one integrated into machinekit is not working. The CRAMPS config is > fine but this one and few others are not working. A long list of error file > pops up. > > > Hi Pranev, > > We can't guess what these errors are. Have a read at this: > http://www.machinekit.io/docs/getting-help/ > > Then pastebin your errors and provide a link so we can see. > -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.