Dear Bas,
thanks for helping me and taking the time.
I'm aware of the two threads. The one you were referring and the 2nd one
from
Michael Brown on "DE10-DE0-Nano - Invitation to collaborate"
Michael Brown also made support for the DE10-CRAMPS
https://github.com/the-snowwhite/mksocfpga/tree/DE10_Nano_FB_Cramps/HW/QuartusProjects
but it seems to me there is nothing for DE10 and DB25 combo which I'm
trying
to achieve. I do not have any issues on kernel, or preparing a rootfs
with machinekit.
That already looks promising on my side.
Best regards,
Mario
On 2017-10-02 09:42, Bas de Bruijn wrote:
On 2 Oct 2017, at 08:56, Mario Scholz
<ma...@expires-2017.mail.trial-n-error.net> wrote:
Hi,
Thanks for your response.
I think there is a misunderstanding. I would like to use Terasic
DE10:
http://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=English&No=1046
I think this thread may interest you.
https://groups.google.com/forum/m/#!topic/machinekit/fleGyyOwDgE
together with the db25 interface board from Charles Steinkühler:
https://oshpark.com/shared_projects/ZSjsiCUd
In order to use HDMI and db25 interface board I need to reprogram
the FPGA and generate a bitstream+device tree to support both. The
DE0 bitstream files will not work as it didn't included an HDMI
section supported by the DE10. Do you agree?
Nevertheless I loop mounted the image you referred to and found only
DE0 (predecessor of DE10) bitstream biles and dtbs
e.g.
lib/firmware/socfpga/DE0_Nano_SoC_DB25.7I76_7I76_7I76_7I76.rbf
lib/firmware/socfpga/DE0_Nano_SoC_DB25.7I76_7I85S_GPIO_GPIO.rbf
lib/firmware/socfpga/DE0_Nano_SoC_DB25.7I77_7I76_GPIO_GPIO.rbf
Best regards,
Mario
On 2017-10-02 08:13, schoone...@btinternet.com wrote:
You don't need to make your own.
There is an image pre-built here
http://deb.machinekit.io/uploads/de0-nano/debian-8.5-console-armhf-2017-02-14/
--
website: http://www.machinekit.io blog: http://blog.machinekit.io
github: https://github.com/machinekit
---
You received this message because you are subscribed to the Google
Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
___ __ ___ __ ___ _ ______ __ _ __________________
Mario Scholz ___/_ __ www :_ ____ www.mario-scholz.de
_____________/_ __ xmpp: mario at im.trial-n-error.net
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.