On Fri, 06 Apr 2018 22:28:37 +0200, Daren Schwenke
<darenschwe...@gmail.com> wrote:
Someone has already done this, but it's kinda old and not the best way.
OpenPNP doesn't work by transferring files btw... it's a streams
interface similar to spoon feeding a dumb 3D printer...as the next
command depends on >the output of previous ones.
Alexander and I have previously discussed a better integration strategy
but I have not gotten around to implementing any of it.
I had also planned to use Machinekit for this:
https://hackaday.io/project/45404-arcus-3d-p1-pnp-for-3d-printers
So you are a little early to the party, but it will get going soon.
Thanks Daren, I will keep watching for it
On Friday, April 6, 2018 at 5:02:41 AM UTC-4, Marius Liebenberg wrote:
I would like to use MK on PocketBeagle to drive n solder paste
applicator. The commands are sent to the controller from OpenPnp via
Gcode or >>custom messages. I might have to write a custom component to
connect to OpenPnp
On Thursday, April 5, 2018 at 9:38:13 PM UTC+2, Daren Schwenke wrote:
Depends on what you are running for your USB. Ethernet, then you are
good.
There is the old way using halcmd stuff, and the new way using the
mkwrapper protocol.
The latter is what is used for Machineface and Cetus. I use
Machineface for running my machine from my tablet. File transfers are
built in then.
On Thursday, April 5, 2018 at 10:09:53 AM UTC-4, Marius Liebenberg
wrote:
Hi
I am planning on using a PocketBeagle for a project that will require
some Gcode to be sent to the controller via USB. What mechanism is
>>>>provided in MK to do this if any?
--website: http://www.machinekit.io blog: http://blog.machinekit.io
github: https://github.com/machinekit
---You received this message because you are subscribed to the Google
Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send
an email to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.
--
Using Opera's mail client: http://www.opera.com/mail/
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups "Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.