> On 30 Dec 2018, at 05:53, mugginsac <muggin...@gmail.com> wrote: > > I have a BBB with a Xylotex-DB25 cape and controller box with a single motor > hooked up for testing. > When I press + or - to jog the motor spins the same direction. > My control box has 3 Superior SS2000MD4 drives in it (old technology). It > requires 25000ns for step, step set up or pause. > Here are links to my Xylotex.ini and Xylotex.hal > > I have Linuxcnc setup on another computer with the same settings as far as I > can tell and it reverses correctly. > So I have the controller working with Linuxcnc but not with Machinekit. > > Can anyone see anything obvious in the .ini or .hal files?
This sounds similar to a question of last week. https://groups.google.com/forum/m/#!topic/machinekit/2pLBaJv-rw8 Please check if this is the same problem. -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.