> On 26 Feb 2019, at 23:32, Condit Alan <muggin...@gmail.com> wrote:
>
> Bas,
>
> The answer would be yes and no. After I first ran it, and saw the new
> messages, I knew people would want to see it with debugging support in order
> to help, I ran it again after “export DEBUG=5”. In essence the new messages
> in /var/log/linuxcnc.log were identical and there weren’t any errors in the
> earlier stuff in the log. But, it wasn’t until shortly after I posted it that
> the significance hit me and that was when I started searching for where those
> new messages were coming from.
>
> How long after a pull request is moved to master, will a “sudo apt-get
> install machinekit” get the updated files from a build? Or should I set up a
> cross build on my linux pc and build from source?
I dont know specifics, but something like 1 to 2 hrs.
>
> Alan
>
>
>
>> On Feb 25, 2019, at 10:18 PM, Bas de Bruijn <b...@basdebruijn.com> wrote:
>>
>>
>>
>>> On 26 Feb 2019, at 06:32, mugginsac <muggin...@gmail.com> wrote:
>>>
>>> Found the culprits. Three more calls to rtapi_print() affected by the
>>> change from RTAPI_MSG_ERR to RTAPI_MSG_ALL.
>>> But I have seemingly created a bug in my config in the process of cleaning
>>> them up.
>>> The axis screen appears for a fraction of a second and then disappears.
>>
>> Did you “export DEBUG=5” before the /var/log/linuxcnc.log?
>
> --
> website: http://www.machinekit.io blog: http://blog.machinekit.io github:
> https://github.com/machinekit
> ---
> You received this message because you are subscribed to the Google Groups
> "Machinekit" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to machinekit+unsubscr...@googlegroups.com.
> Visit this group at https://groups.google.com/group/machinekit.
> For more options, visit https://groups.google.com/d/optout.
--
website: http://www.machinekit.io blog: http://blog.machinekit.io github:
https://github.com/machinekit
---
You received this message because you are subscribed to the Google Groups
"Machinekit" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to machinekit+unsubscr...@googlegroups.com.
Visit this group at https://groups.google.com/group/machinekit.
For more options, visit https://groups.google.com/d/optout.