> On 5 Mar 2019, at 12:20, destra...@gmail.com wrote: > > Sorry :-) > > You are absolutely right. I'm running Debian stretch with Kernel > > #1 SMP RPEEMPT RT Debian 4.9.144-3.1 (2019-02-19) > > on an conventional PC. > > 1. It worked with Machinekit 0.1.1543327459.gite758f69-1~stretch. It doesn't > work with 0.1.1551530147.git6a143ec-1~stretch. > I tried to launch it without hm2_pci config string, but it doesn't work. > > 2. I started it from the terminal window, with 'export DEBUG=5' (see attached > log file), same problems. > > 3. Error text from bash is attached (output.log). Makes no sense for me. > > 4./5. I've search linuxcnc.log for clues. Problems start for me with the > above mention permission denied error.
Not sure how much i can help here. Further on there’s this section: 8888:rt halg_xinitfv:90 HAL: initializing component 'hm2_pci' type=1 arg1=0 arg2=0/0x0 Mar 5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt PCI_ID: 2718:5125 2718:5125 Mar 5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt RTAPI_PCI: DeviceID: 2718 5125 2718 5125 Mar 5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt RTAPI_PCI: Calling driver probe function Mar 5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt RTAPI_PCI: Enabling Device 0000:03:00.0 Mar 5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt Resource 0: 0xf7e00000 0xf7e0ffff 00000000 Mar 5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt Failed to parse "/sys/devices/pci0000:00/0000:00:1c.2/0000:02:00.0/0000:03:00.0/resource" Mar 5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt hm2_pci: skipping AnyIO board at 0000:03:00.0, failed to enable PCI device Mar 5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt Driver probe function failed! Mar 5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib:8888:rt hm2_pci: error registering PCI driver Mar 5 11:38:33 labor-linuxcnc-m2 msgd:0: hal_lib: Did other things get updates too perhaps? > > 6. I've searched the forum again, and I found a similar problem. > (https://groups.google.com/forum/#!searchin/machinekit/hm2_pci/machinekit/fahrSvm6b5c/vhK8S_NOEQAJ) > with no solution yet as far as I can see. Please excuse for not answering in > this topic, I simply didn't find it on my first search iteration. > > 7. I cannot see anything related on the issue tracker. > > Thank you very much > Best regards > > > Am Dienstag, 5. März 2019 11:12:29 UTC+1 schrieb Schooner: >> >> Please read >> http://www.machinekit.io/docs/getting-help/ >> >> No-one can help you with this amount of information. >> >> >> On 05/03/19 07:16, dest...@gmail.com wrote: >>> Hello dear Machinekit community, >>> we've successfully implemented a self built 3d printer with Machinekit. For >>> stepper signal generation, we use the above mentioned cards. Up until >>> yesterday, our config was working with the string >>> >>> rt.loadrt('hm2_pci', config='num_encoders=1 num_stepgens=4 >>> sserial_port_0="00xxxx"') >>> >>> Yesterday I updated via apt-get upgrade to Machinekit version >>> 0.1.1551530147.git6a143ec-1~stretch and now we get the following error on >>> launch: >>> >>> RuntimeError: rtapi_loadrt '('hm2_pci', 'config=num_encoders=1 >>> num_stepgens=4 sserial_port_0="00xxxx"')' failed: Operation not permitted >>> >>> Have you seen this error before? >>> >>> Best regards >>> Dennis >>> -- >>> website: http://www.machinekit.io blog: http://blog.machinekit.io github: >>> https://github.com/machinekit >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "Machinekit" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to machinekit+...@googlegroups.com. >>> Visit this group at https://groups.google.com/group/machinekit. >>> For more options, visit https://groups.google.com/d/optout. > > -- > website: http://www.machinekit.io blog: http://blog.machinekit.io github: > https://github.com/machinekit > --- > You received this message because you are subscribed to the Google Groups > "Machinekit" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to machinekit+unsubscr...@googlegroups.com. > Visit this group at https://groups.google.com/group/machinekit. > For more options, visit https://groups.google.com/d/optout. > <output.log> > <linuxcnc.log> -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.