On 5/2/2019 10:29 PM, justin White wrote: > I'm not quite sure what to do with the vhd > file either at the moment, does it got loaded from the hal file. Also any > idea why halshow fails to load from the Axis GUI?
The VHD files are VHDL code describing the logic inside the FPGA. This code gets compiled by the vendor tool-chain and turned into a configuration file used to program the FPGA. You asked earlier about HM2 to support encoder interfaces. The HM2 driver already supports all the different types of logic currently implemented in the FPGA, including encoder, stepgen, pwm, smart serial, etc. To get an encoder to show up, just program the FPGA with an appropriate configuration file and the HM2 driver will detect the encoder instances. It sounds like Michael is helping you with an appropriate FPGA configuration. -- Charles Steinkuehler char...@steinkuehler.net -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. For more options, visit https://groups.google.com/d/optout.
