There was something wrong with my build environment, deleted it and I was able to get a good .rbf.
I wasn't able to get this working with my 8i20 though. I added "sserial_port_0=00xxxx" to the config line as in my other sserial configs. I'll probably hold off on anymore testing until I get a board fabbed with dedicated serial hardware, but the firmware could probably use some looking into. On Sunday, July 14, 2019 at 6:08:13 AM UTC-4, justin White wrote: > > Any insight on the issue with the rbf? -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. Visit this group at https://groups.google.com/group/machinekit. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/a456863f-6134-4106-b61c-9ab52d82189c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
