Hi all I have lost many time with the ebay controler and i'm not really happy with this product, many difficulty for make something work, not really stable and i have at multiple time burned something...
I'm close to work again with some KBMG-212D controler but i like to found a "easy way" for PWM 0/24v to digital +/-10v Unfortunatly i'm really unsure about some diy schematics and resistor calculating possible to found on the web. After spend many time schearching ready to order over the web i have finally found this now and i hope this one is ok ! I really like if someone can check a little and can confirm one of these ar ok. Did you know if i can use directly my pwm output to the converter input choosing the 0/24v input version ? Or i need to use the my pwm connected to DAC 0/10v and connect DAC outpup choosing the 0/10v input version ? Any suggestion are really welcome, i'm really affrais to burn something another time. Many thanks for reading, Br -- website: http://www.machinekit.io blog: http://blog.machinekit.io github: https://github.com/machinekit --- You received this message because you are subscribed to the Google Groups "Machinekit" group. To unsubscribe from this group and stop receiving emails from it, send an email to machinekit+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/machinekit/2e6c938b-fbc0-4da5-b866-c10c14111dd7%40googlegroups.com.
