Hello, Here is a short step by step howto: - Switch off the 770 device. - Plug in the usb cable. - Execute flasher. $ flasher --enable-rd-mode - Flasher starts waiting in the loop until you switch the device back on. - Switch on the 770 device. - And you are done.
Best Regards, Karoliina Salminen http://www.karoliinasalminen.com/blog >-----Original Message----- >From: [EMAIL PROTECTED] >[mailto:[EMAIL PROTECTED] On Behalf Of ext >Marco Wierer >Sent: 17 November, 2005 23:28 >To: [email protected] >Subject: [maemo-developers] Still problems with Linux flasher tool... > >Hello, > >I'm trying to activate the r&d mode on my device using the >Linux flasher tool but the tool just waits in an endless loop >waiting for the device (Suitable USB device not found, >waiting). I already read all threads regarding this topic but >I don't have a clue what I'm doing wrong: I turn off the >device, start the flasher tool, attach the device and power on >the device but without success. I also removed the MMC - same >result. The device is simply booting and telling me that it's >attached to USB. >The 770 is directly connected to the USB interface on my >computer (no hub) and I have firmware version 1.2005.42-9 >installed on the device. I'm using SuSE 9.3 - any thoughts? > >Thnx, >Marco > > > >_______________________________________________ >maemo-developers mailing list >[email protected] >https://maemo.org/mailman/listinfo/maemo-developers > _______________________________________________ maemo-developers mailing list [email protected] https://maemo.org/mailman/listinfo/maemo-developers
