Hi all,
my device doesn't boot anymore. I have enabled the R&D mode and after
displaying the installed versions, it turns off. Most of the time, I can
not even turn on the device again.
Now I tried to update with the linux flasher. During flashing, the
device turned off after three-four seconds (similar if i try to boot).
This what appears on the console:
**************snip**************
[EMAIL PROTECTED]:/ablage/maemo/factory image$ sudo flasher -F
Nokia_770_SE2005_3_2005_51_13.bin -f
Password:
Found image 2nd (length 8576)
Found image secondary (length 79360)
Found image xloader (length 13824)
Found image initfs (length 1581824)
Found image kernel (length 1481856)
Found image rootfs (length 58851328)
Suitable USB device not found, waiting
USB device found found at bus 003, device address 012
Found board Nokia 770 (F5)
NOLO version 0.9.0
Sending X-Loader image (13 kB)...
100% (13 of 13 kB, avg. 750 kB/s)
Sending secondary image (77 kB)...
100% (77 of 77 kB, avg. 861 kB/s)
Flashing X-Loader... done.
Sending kernel image (1447 kB)...
100% (1447 of 1447 kB, avg. 948 kB/s)
Flashing kernel... done.
Sending initfs image (1544 kB)...
16% (256 of 1544 kB, 920 kB/s)
Write failed after 262144 bytes
usb_bulk_write: Protocol error
**************snip**************
It is really very terrible, because this happends two weeks before the
end date of my thesis :-(((((
Any ideas how I can fix this???
Cheers,
Timo
_______________________________________________
maemo-users mailing list
maemo-users@maemo.org
https://maemo.org/mailman/listinfo/maemo-users
