If you can find a program list that includes bank numbers it's not difficult to make these.
> -----Original Message----- > From: [email protected] [mailto:[email protected]] On Behalf Of > Juan Bello > Sent: Tuesday, May 12, 2015 1:35 PM > To: QWS list > Subject: Re: QWS List no metronome sound > > yeah, I wish there was one for the Yamaha YPG 625 > > 2015-05-12 13:23 GMT-05:00, Joe Giovanelli <[email protected]>: > > Well, Nicole and others, I have everything working correctly. > > > > When you mentioned loading and playing a sequence and running the > > metronome that I understood the error of my ways. I thought the > > metronome should run independent of a sequence so one could adjust > > tempo. Once I heard the metronome during a playback, I figured that > > I'd have to set tempo during a recording. I inserted a track and > started recording, adjusting the tempo. > > Naturally I didn't keep the recording. > > > > I sincerely thank you, Richard Wells and others who helped me get > this > > working. The instrument list is a super idea because it lets us hear > > any or all available sounds contained in our equipment. > > > > Joe Giovanelli > > > > ----- Original Message ----- > > From: Nicole Massey <[email protected]> > > To: "QWS list" <[email protected]> > > Date: Tuesday, May 12, 2015 0:04 > > Subject: RE: QWS List no metronome sound > > > >> > >> > >> Okay, let's do this step by step. > >> Click on Options and arrow down to Metronome. > >> Set the channel, port, note, and a velocity of 127 for the first > beat. > >> Set > >> things the same, only differing on the note, for the other beats. > >> Load a sequence. Press the space bar. It should play. If you don't > >> hear the metronome then press Fbled and you should hear the > >> metronome. While it's playing go to the right channel and hit the > >> keys for the metronome sounds and see if they play this way. > >> > -----Original Message----- > >> > From: [email protected] [mailto:[email protected]] On > >> > Behalf Of Joe Giovanelli > >> > Sent: Monday, May 11, 2015 7:51 PM > >> > To: QWS list > >> > Subject: Re: QWS List no metronome sound > >> > > >> > Hello again, > >> > > >> > I think I did all you suggested. I have the preferred instrument > >> > and port set. > >> > > >> > I copied the Casio instrument list into the QWS folder. > >> > > >> > Under Options, I chose Instrument. Two ports are shown, including > >> > the one I need. It is never selected. I could select the > >> > instrument, however. > >> > > >> > I set up a dummy track and found that I can play every instrument > >> > on the list. This includes the drum set for the metronome. > >> > > >> > The settings for the metronome correspond to what I found in the > >> > instrument list. > >> > > >> > To me this should mean that the path between input withkeyboard) > >> > and output, synth out) is as it should be. > >> > > >> > I still have no metronome. > >> > > >> > I guess this can still be pilot error. I'm old enough now, so that > >> > I have learned how to make tons of mistakes. > >> > > >> > I can only hope you're still with me. > >> > > >> > Joe Giovanelli > >> > > >> > ----- Original Message ----- > >> > From: Nicole Massey <[email protected]> > >> > To: "QWS list" <[email protected]> > >> > Date: Monday, May 11, 2015 8:13 > >> > Subject: RE: QWS List no metronome sound > >> > > >> > > > >> > > > >> > > If you configure QWS to use that instrument definition file it > >> > > may solve your problems, as you'll point to exactly the > >> > > instrument you > >> > want. > >> > > Copy the INST file into your QWS directory. That should let you > >> > access > >> > > it in QWS. Set it up as the default instrument map for the port > >> > you're > >> > > using to reach the synth and then check your sound selections in > >> > > the tracks, especially the track with the metronome. > >> > > > >> > > > -----Original Message----- > >> > > > From: [email protected] [mailto:[email protected]] On > >> > Behalf > >> > > > Of Joe Giovanelli > >> > > > Sent: Monday, May 11, 2015 6:59 AM > >> > > > To: QWS list > >> > > > Subject: Re: QWS List no metronome sound > >> > > > > >> > > > hi, Richard, > >> > > > > >> > > > Thank you very much for the instrument info. I had no idea > that > >> > > > there were all those banks and extra instruments beyond what > we > >> > > > usually have in Bank 0. > >> > > > > >> > > > I'm not sure this will solve my problems but it does tell me > >> > > > more than I knew about my synth. > >> > > > > >> > > > Knowing all the sounds in this unit is great. It seems to me > >> > > > that > >> > my > >> > > > problems do not relate to this material. My experiments were > >> > > > just with the sounds in Bank 0. > >> > > > > >> > > > I'm in this way over my head so it could be that I don't know > >> > enough > >> > > > to see the problem in light of what you sent me. > >> > > > > >> > > > I used to do a lot of sequencing 10 years ago and never had > >> > trouble. > >> > > > This is a different synth from any I have used previously. > >> > > > > >> > > > If you have other ideas, please me have them. I do not pretend > >> > > > to have superior knowledge. > >> > > > > >> > > > Joe Giovanelli > >> > > > > >> > > > ----- Original Message ----- > >> > > > From: Richard Wells <[email protected]> > >> > > > To: "QWS list" <[email protected]> > >> > > > Date: Sunday, May 10, 2015 21:20 > >> > > > Subject: Re: QWS List no metronome sound > >> > > > > >> > > > > > >> > > > > > >> > > > > Hi Joe: Since you mentioned the PX350, I will send you the > >> > > > > instrument definition file my wife wrote for me. Let me know > >> > > > > if > >> > it > >> > > > > resolves your metronome and tracking playing issues. Thanks > >> > > > > On > >> > > > > 5/10/2015 2:14 PM, Joe Giovanelli wrote: > >> > > > > > Hieaationicole, > >> > > > > > > >> > > > > > Again, I thank you for taking time to consider my problem. > >> > > > > > I suspect that you are on the right track that it's > >> > > > > > something > >> > to > >> > > > > > do > >> > > > with out ports. There's more than the metronome problem. > >> > > > > > > >> > > > > > Along with that situation, I can go to a track and when I > >> > > > > > play the > >> > > > keyboard, the right instrument sounds. The exception, and this > >> > > > must be significaant, is that when I select the drum kit on > >> > > > Channel 10, the wrong instrument sounds. > >> > > > > > > >> > > > > > This appears to be something with my Casio PX-350 or > >> > > > > > perhaps > >> > > > something about its MIDI implementation. I can only hope that > >> > > > my friend will find something in the synth manual which might > >> > > > aid in > >> > fixing this. > >> > > > > > > >> > > > > > Perhaps you or someone else on this list knows of > something > >> > more > >> > > > that I can do. > >> > > > > > > >> > > > > > Again, thanks to all who have written with your ideas. > >> > > > > > > >> > > > > > Joe Giovanelli > >> > > > > > ----- Original Message ----- > >> > > > > > From: Nicole Massey <[email protected]> > >> > > > > > To: "QWS list" <[email protected]> > >> > > > > > Date: Friday, May 8, 2015 21:52 > >> > > > > > Subject: RE: QWS List no metronome sound > >> > > > > > > >> > > > > >> > >> > > > > >> Okay, then it's not a QWS problem, it's something with > >> > > > > >> your sound > >> > > > source. > >> > > > > >> QWS is going to send MIDI out no matter what. > >> > > > > >> Check your output port for the metronome * that might be > >> > > > > >> the > >> > > > problem. > >> > > > > >> > >> > > > > >>> -----Original Message----- > >> > > > > >>> From: [email protected] > >> > > > > >>> [mailto:[email protected]] On Behalf Of Joe > >> > > > > >>> Giovanelli > >> > > > > >>> Sent: Friday, May 08, 2015 8:45 PM > >> > > > > >>> To: QWS list > >> > > > > >>> Subject: Re: QWS List no metronome sound > >> > > > > >>> > >> > > > > >>> Yes. I have played a number of standard MIDI files. > >> > > > > >>> > >> > > > > >>> Joe > >> > > > > >>> > >> > > > > >>> ----- Original Message ----- > >> > > > > >>> From: Nicole Massey <[email protected]> > >> > > > > >>> To: "QWS list" <[email protected]> > >> > > > > >>> Date: Friday, May 8, 2015 20:55 > >> > > > > >>> Subject: RE: QWS List no metronome sound > >> > > > > >>> > >> > > > > >>>> > >> > > > > >>>> Does any standard MIDI file play for you? > >> > > > > >>>> > >> > > > > >>>>> -----Original Message----- > >> > > > > >>>>> From: [email protected] > >> > > > > >>>>> [mailto:[email protected]] On > >> > > > > >>> Behalf > >> > > > > >>>>> Of Joe Giovanelli > >> > > > > >>>>> Sent: Friday, May 08, 2015 5:15 PM > >> > > > > >>>>> To: QWS list > >> > > > > >>>>> Subject: Re: QWS List no metronome sound > >> > > > > >>>>> > >> > > > > >>>>> Hi, Nicole, > >> > > > > >>>>> > >> > > > > >>>>> First, I fixed the latency when I saw something about > >> > > > "preferred > >> > > > > >>>>> device." I chose my instrument and all was great! > >> > > > > >>>>> > >> > > > > >>>>> The metronome still does not click even after doing > >> > > > > >>>>> what > >> > you > >> > > > > >>>>> suggested here. > >> > > > > >>>>> > >> > > > > >>>>> I'm about ready to uninstall QWS and re-install it. I > >> > > > > >>>>> had this thought for another reason: When I look at > the > >> > > > > >>>>> MIDI files I > >> > > > have > >> > > > > >>>>> in the QWS directory, only a few are shown, even ones > >> > > > > >>>>> which I have > >> > > > > >>> deleted. > >> > > > > >>>>> I've closed and re-opened QWS and files list still > does > >> > > > > >>>>> not > >> > > > read > >> > > > > >>>>> correctly. I've had enough of this for one day. I'll > >> > > > > >>>>> get back > >> > > > to > >> > > > > >>>>> it tomorrow. > >> > > > > >>>>> > >> > > > > >>>>> Thanks very much for your continuing interest and > help. > >> > > > > >>>>> > >> > > > > >>>>> Joe Giovanelli > >> > > > > >>>>> > >> > > > > >>>>> ----- Original Message ----- > >> > > > > >>>>> From: Nicole Massey <[email protected]> > >> > > > > >>>>> To: "QWS list" <[email protected]> > >> > > > > >>>>> Date: Friday, May 8, 2015 11:37 > >> > > > > >>>>> Subject: RE: QWS List no metronome sound > >> > > > > >>>>> > >> > > > > >>>>>> > >> > > > > >>>>>> Okay, check the following things in this order. > >> > > > > >>>>>> First go to a track that is set up for the channel > and > >> > > > > >>>>>> sound you want to use for your metronome sound. Play > >> > > > > >>>>>> the keyboard > >> > > > and > >> > > > > >>>>>> make sure it's > >> > > > > >>>>> sounding. > >> > > > > >>>>>> Find the sounds you want to use for your two > metronome > >> > sounds. > >> > > > > >>>>>> In QWS go to the Options menu and pick Metronome. > Make > >> > sure > >> > > > > >>>>>> it's set to the correct channel. In the boxes press > >> > > > > >>>>>> the > >> > key > >> > > > > >>>>>> on your keyboard that triggers the sounds you want to > >> > > > > >>>>>> use for > >> > > > your > >> > > > > >>> metronome sounds. > >> > > > > >>>>>> You should hear them as you play them. For now set > the > >> > > > > >>>>>> volume on both to 127. Also set how many count ins > you > >> > want > >> > > > > >>>>>> for the > >> > > > > >>> playback > >> > > > > >>>>>> and recording windows. Tab down to OK and hit either > >> > > > > >>>>>> the > >> > > > space > >> > > > > >>>>>> bar or > >> > > > > >>>>> Enter to save your settings. > >> > > > > >>>>>> Now start a sequence and you should be able to turn > it > >> > > > > >>>>>> on and off > >> > > > > >>>>> with > >> > > > > >>>>>> the Fbled key. > >> > > > > >>>>>> > >> > > > > >>>>>>> -----Original Message----- > >> > > > > >>>>>>> From: [email protected] > >> > [mailto:[email protected]] > >> > > > > >>>>>>> On > >> > > > > >>>>> Behalf > >> > > > > >>>>>>> Of Joe Giovanelli > >> > > > > >>>>>>> Sent: Friday, May 08, 2015 10:25 AM > >> > > > > >>>>>>> To: QWS list > >> > > > > >>>>>>> Subject: Re: QWS List no metronome sound > >> > > > > >>>>>>> > >> > > > > >>>>>>> Hi, Juan, > >> > > > > >>>>>>> > >> > > > > >>>>>>> Very good! I did exactly what you suggested and the > >> > > > > >>>>>>> metronome still does not sound. What did I miss? > >> > > > > >>>>>>> > >> > > > > >>>>>>> Joe Giovanelli > >> > > > > >>>>>>> > >> > > > > >>>>>>> ----- Original Message ----- > >> > > > > >>>>>>> From: Juan Bello <[email protected]> > >> > > > > >>>>>>> To: "QWS list" <[email protected]> > >> > > > > >>>>>>> Date: Friday, May 8, 2015 8:24 > >> > > > > >>>>>>> Subject: Re: QWS List no metronome sound > >> > > > > >>>>>>> > >> > > > > >>>>>>>> > >> > > > > >>>>>>>> hello, on the options menu, on the metronome item > >> > > > > >>>>>>>> you > >> > can > >> > > > > >>>>>>>> choose the output port and channel, and note for > the > >> > clicks. > >> > > > > >>>>>>>> First make sure > >> > > > > >>>>>>> that > >> > > > > >>>>>>>> your keyboard is selected as the output port and > >> > > > > >>>>>>>> chennel > >> > > > > >>>>>>>> 10 > >> > > > > >>> is > >> > > > > >>>>>>>> selected. Then, find a note that corresponds to a > >> > > > > >>>>>>>> drum sound on your keyboard, experiment with the > >> > > > > >>>>>>>> midle range notes. It should > >> > > > > >>>>> now sound. > >> > > > > >>>>>>>> You eneable and disable the metronome with fbled. > >> > > > > >>>>>>>> > >> > > > > >>>>>>>> 2015-05-08 6:57 GMT-05:00, Joe Giovanelli > >> > > > > >>>>> <[email protected]>: > >> > > > > >>>>>>>>> Hello Listers, > >> > > > > >>>>>>>>> > >> > > > > >>>>>>>>> As I said earlier, I've been been away from > >> > > > > >>>>>>>>> sequencing for > >> > > > > >>> a > >> > > > > >>>>>>>>> very long time but have gotten things just about > >> > > > > >>>>>>>>> ready to > >> > > > > >>> do > >> > > > > >>>>>>>>> serious > >> > > > > >>>>>>> sequencing. > >> > > > > >>>>>>>>> The biggest problem left is that the metronome > does > >> > > > > >>>>>>>>> not > >> > > > > >>> sound. > >> > > > > >>>>>>>>> I've set the options to their defaults. > >> > > > > >>>>>>>>> > >> > > > > >>>>>>>>> There must be a missing step, like telling the > >> > metronome > >> > > > > >>>>>>>>> where to find the drum kit. > >> > > > > >>>>>>>>> > >> > > > > >>>>>>>>> Thank you for your help. > >> > > > > >>>>>>>>> > >> > > > > >>>>>>>>> Joe Giovanelli > >> > > > > >>>>>>>>> To unsubscribe or change list options, see > >> > > > > >>>>>>>>> http://lists.andrelouis.com > >> > > > > >>>>>>>>> > >> > > > > >>>>>>>>> for archived list posts, see > >> > > > > >>>>>>>>> http://www.mail-archive.com/[email protected] > >> > > > > >>>>>>>>> > >> > > > > >>>>>>>> > >> > > > > >>>>>>>> > >> > > > > >>>>>>>> Juan Pablo Bello > >> > > > > >>>>>>>> Cel. 313-879-2884 > >> > > > > >>>>>>>> To unsubscribe or change list options, see > >> > > > > >>>>>>> http://lists.andrelouis.com > >> > > > > >>>>>>>> for archived list posts, see > >> > > > > >>>>>>>> http://www.mail-archive.com/[email protected] > >> > > > > >>>>>>> To unsubscribe or change list options, see > >> > > > > >>>>>>> http://lists.andrelouis.com > >> > > > > >>>>>>> > >> > > > > >>>>>>> for archived list posts, see http://www.mail- > >> > > > > >>>>>>> archive.com/[email protected] > >> > > > > >>>>>> To unsubscribe or change list options, see > >> > > > > >>>>> http://lists.andrelouis.com > >> > > > > >>>>>> for archived list posts, see > >> > > > > >>>>>> http://www.mail-archive.com/[email protected] > >> > > > > >>>>> To unsubscribe or change list options, see > >> > > > > >>>>> http://lists.andrelouis.com > >> > > > > >>>>> > >> > > > > >>>>> for archived list posts, see http://www.mail- > >> > > > > >>>>> archive.com/[email protected] > >> > > > > >>>> To unsubscribe or change list options, see > >> > > > > >>> http://lists.andrelouis.com > >> > > > > >>>> for archived list posts, see > >> > > > > >>>> http://www.mail-archive.com/[email protected] > >> > > > > >>> To unsubscribe or change list options, see > >> > > > > >>> http://lists.andrelouis.com > >> > > > > >>> > >> > > > > >>> for archived list posts, see http://www.mail- > >> > > > > >>> archive.com/[email protected] > >> > > > > >> To unsubscribe or change list options, see > >> > > > > >> http://lists.andrelouis.com > >> > > > > >> > >> > > > > >> for archived list posts, see > >> > > > > >> http://www.mail-archive.com/[email protected] > >> > > > > > To unsubscribe or change list options, see > >> > > > > > http://lists.andrelouis.com > >> > > > > > > >> > > > > > for archived list posts, see > >> > > > > > http://www.mail-archive.com/[email protected] > >> > > > To unsubscribe or change list options, see > >> > > > http://lists.andrelouis.com > >> > > > > >> > > > for archived list posts, see http://www.mail- > >> > > > archive.com/[email protected] > >> > > > >> > > To unsubscribe or change list options, see > >> > http://lists.andrelouis.com > >> > > > >> > > for archived list posts, see > >> > > http://www.mail-archive.com/[email protected] > >> > To unsubscribe or change list options, see > >> > http://lists.andrelouis.com > >> > > >> > for archived list posts, see http://www.mail- > >> > archive.com/[email protected] > >> > >> To unsubscribe or change list options, see > >> http://lists.andrelouis.com > >> > >> for archived list posts, see > >> http://www.mail-archive.com/[email protected] > > To unsubscribe or change list options, see > http://lists.andrelouis.com > > > > for archived list posts, see > > http://www.mail-archive.com/[email protected] > > > > > -- > Juan Pablo Bello > Cel. 313-879-2884 > To unsubscribe or change list options, see http://lists.andrelouis.com > > for archived list posts, see http://www.mail- > archive.com/[email protected] To unsubscribe or change list options, see http://lists.andrelouis.com for archived list posts, see http://www.mail-archive.com/[email protected]
