Maptitude - http://research.umbc.edu/~roswell/maptitude.html
Bob,
I've experienced this too, and I'm as interested as you are in finding out a
solution. My problem is a little different than yours in that it has come
only in printing, and then only occasionally. As you describe, the layer
impacted has been selected with a solid fill, and most polygons in the layer
print normally with a few left out for no discernible reason.
I've tried checking selection sets and polygon fill settings, with no
positive results. The only common denominator with some of mine has been
that they involved printing to Adobe Acrobat 3.0 (PDF Writer), and now that
I've upgraded to Acrobat 4.0 I haven't had any problems that way at all
(thanks for the helpful Acrobat comments from this group!).
Potential ideas:
- check that your video and printer drivers are current (again, this is
advice I received from this group a few weeks back), Maptitude is apparently
particularly demanding in this area
- if you have Acrobat 4.0, you could try creating an Acrobat file via PDF
Writer first, then print this to your printer next. This has turned out to
be somewhat more reliable than printing to my printer on a couple of jobs.
Sorry for the lack of really good solutions, hopefully knowing that more
than one has this same problem will encourage anyone with better solutions
to step forward.
Murray Rice
Altavision Geographics
[EMAIL PROTECTED]
----- Original Message -----
From: "Leore, Robert" <[EMAIL PROTECTED]>
To: "Maptitude" <[EMAIL PROTECTED]>
Sent: Monday, February 12, 2001 1:41 PM
Subject: [Maptitude] Problem displaying or printing an area layer with a
solid fill
> Maptitude - http://research.umbc.edu/~roswell/maptitude.html
>
> Here is a peculiar problem I am hoping others may also have experienced:
I
> have a polygon layer of Canada in which some regions (in this case B.C.,
> Newfoundland, and NWT) do not display/print with a solid fill even though
a
> solid fill has been selected for the layer. Moreover, though these same
> regions may not display or print at certain scales they do display and
print
> properly at other scales.
>
> Any insights into why the regions are not displaying/printing a solid fill
> colour at all scales would be appreciated.
>
> Bob
>
>
> ______________________________________________________________________
> To unsubscribe, write to [EMAIL PROTECTED]
______________________________________________________________________
To unsubscribe, write to [EMAIL PROTECTED]
