Matt,
your problem may not be related to IP masq at all.
I'm also seeing periodic outages on my cable modem, usually ranging from
1-10 minutes. I usually call @home then, but they keep you at least 10
minutes either on hold or verifying personal information so that
the outage will be over by the time they get down to debugging it.
We'll see. There's always ADSL that one can switch to if they don't get
their act together.
- Godmar
>
>
> Hi there
>
> I had a problem with ipmasq "breaking" my routing every once in a while. by that i
>mean, it would work for 1/2hour, then it would quit for 2 minutes, then work for
> maybe 2 hours, then quit for 1 minute, etc. Basically, during that "minute" period,
>I could to the outside world (i'm on a cable modem).
>
> system: was rh5.2, now is rh6.0 (clean install), running 2.2.9 kernel, with 2 intel
>pro/100 nic's, in a HP E40 Netserver.
>
> Anything to check "obviously" right off the bat? I noticed that when the system
>reboots and runs its depmod, thereare a lot of unresolved symbol errors. I am
> thinking i should recompile again, should i deletet everything under /lib/modules
>before I do so, to clean it out?Or is it more of a masq thing? i am not sure
> where to start looking.
>
> one thing i forgot, when my ip is not "working", and i do a traceroute to anything
>outside, it gets to the first line before it stops, and i get a "!H" error. ?
> (and i do NOT have ipautofw in the kernel, just ipportfw)
>
> thanks
> Matt
>
>
>
>
>
>
> _______________________________________________
> Masq maillist - [EMAIL PROTECTED]
> http://tiffany.indyramp.com/mailman/listinfo/masq
> Admin requests can be handled by web (above) or [EMAIL PROTECTED]
>
_______________________________________________
Masq maillist - [EMAIL PROTECTED]
http://tiffany.indyramp.com/mailman/listinfo/masq
Admin requests can be handled by web (above) or [EMAIL PROTECTED]
