See Table 6-1 in the User’s Manual
<http://www.pserc.cornell.edu/matpower/docs/MATPOWER-manual-5.1.pdf> for
results of the OPF, including LAM_P which is the LMP and see Section 4.4 for a
description of MATPOWER’s functions for computing shift factors.
Ray
> On Jun 16, 2015, at 4:14 AM, lavanya arubolu <[email protected]> wrote:
>
> Dear Nandu Balachandran,
> There is inbuilt function in MATPOWER
> to know the LMPs at all the buses. If you want to calculate LMPs for a
> particular system run OPF and see the results, in OPF results one function
> called Lamada this indicates LMPs at all the buses. I think direct
> calculation of GSF is not possible using MATPOWER we have to write code for
> this. I hope this will clarify your doubt.
> Thank you
>
>
> On Tue, Jun 16, 2015 at 11:14 AM, Nandu Balachandran <[email protected]
> <mailto:[email protected]>> wrote:
> Dear Dr. Zimmerman,
>
>
> Does MATPOWER has some inbuilt function for calculating LMP at each node? Is
> there a way to calculate Generator Shift Factor after calculating OPF
> solution using "runopf ( )" ?
>
> Thanks and appreciate your help
> -
> Thanks,
> Nandu Balachandran
> The University of New Orleans
> [email protected] <mailto:[email protected]>
> Ph No: +1 (504) 505-1087
>
>
