I would like to talk to others who have an IL Advance coagulation analyzer and are trying to use auto-release. We have an issue with critical high results. Apparently they do not transmit from the analyzer to Meditech, perhaps due to flags on the assay. I would like to know if others have encountered this problem, and whether a fix has been found.
Currently, we manually enter the results, but this has caused some delays in communicating critical lab results. Thanks. Rich Griffith Coordinator, Info Mgmt, QM & Compliance Hagerstown Medical Laboratory Washington County Health System Voice: 301-665-4906 e-mail: [EMAIL PROTECTED] ***** CONFIDENTIALITY NOTICE ***** This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. Please notify the sender immediately by e-mail if you have received this e-mail by mistake and delete this e-mail from your system. =*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*= To subscribe or unsubscribe to the meditech-l, visit http://mtusers.com/mailman/listinfo/meditech-l_mtusers.com To check the status of the meditech-l, visit MTUsers.NET For help, email [EMAIL PROTECTED] Please visit and add information to the MTUsers WikiPedia at MTUsers.NET/mwiki ______________________________________ meditech-l mailing list meditech-l@MTUsers.com http://mtusers.com/mailman/listinfo/meditech-l_mtusers.com