This completely doesn't solve the issue. The underlying macro salad that attempts to translate these messages is completely broken, and so, the messages are getting back on the console no matter what LOGLEVEL you use.
fixing the loglevel for every message will not fix it, please fix the macro salad instead. Auke On Thu, Jun 2, 2011 at 3:06 PM, Chang, Samuel <[email protected]> wrote: > Subject: Unnecessary log during driver loading, set the debug level to INFO > > Signed-off-by: Samuel Chang <[email protected]> > > diff -ruN > kernel-2.6.37.6-11.5/drivers/staging/ar6003/hif/sdio/linux_sdio/src/hif.c > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/hif/sdio/linux_sdio/src/hif.c > --- kernel-2.6.37.6-11.5/drivers/staging/ar6003/hif/sdio/linux_sdio/src/hif.c > 2011-05-27 06:16:59.000000000 +0800 > +++ > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/hif/sdio/linux_sdio/src/hif.c > 2011-06-03 05:38:24.931220050 +0800 > @@ -812,7 +812,7 @@ > > break; > case HIF_DEVICE_GET_PENDING_EVENTS_FUNC: > - AR_DEBUG_PRINTF(ATH_DEBUG_WARN, > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO, > ("AR6000: configuration opcode %d is not used for > Linux SDIO stack", opcode)); > status = A_ERROR; > break; > @@ -820,7 +820,7 @@ > *((HIF_DEVICE_IRQ_PROCESSING_MODE *)config) = > HIF_DEVICE_IRQ_SYNC_ONLY; > break; > case HIF_DEVICE_GET_RECV_EVENT_MASK_UNMASK_FUNC: > - AR_DEBUG_PRINTF(ATH_DEBUG_WARN, > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO, > ("AR6000: configuration opcode %d is not used for > Linux SDIO stack", opcode)); > status = A_ERROR; > break; > @@ -841,12 +841,12 @@ > status = PowerStateChangeNotify(device, > *(HIF_DEVICE_POWER_CHANGE_TYPE *)config); > break; > case HIF_DEVICE_GET_IRQ_YIELD_PARAMS: > - AR_DEBUG_PRINTF(ATH_DEBUG_WARN, > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO, > ("AR6000: configuration opcode %d is only used > for RTOS systems, not Linux systems", opcode)); > status = A_ERROR; > break; > default: > - AR_DEBUG_PRINTF(ATH_DEBUG_WARN, > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO, > ("AR6000: Unsupported configuration opcode: > %d\n", opcode)); > status = A_ERROR; > } > diff -ruN kernel-2.6.37.6-11.5/drivers/staging/ar6003/htc2/AR6000/ar6k.c > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/htc2/AR6000/ar6k.c > --- kernel-2.6.37.6-11.5/drivers/staging/ar6003/htc2/AR6000/ar6k.c > 2011-05-27 06:16:59.000000000 +0800 > +++ > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/htc2/AR6000/ar6k.c > 2011-06-03 05:38:55.331370799 +0800 > @@ -158,7 +158,7 @@ > > switch (pDev->HifIRQProcessingMode) { > case HIF_DEVICE_IRQ_SYNC_ONLY: > - AR_DEBUG_PRINTF(ATH_DEBUG_WARN,("HIF Interrupt processing is > SYNC ONLY\n")); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("HIF Interrupt processing is > SYNC ONLY\n")); > /* see if HIF layer wants HTC to yield */ > HIFConfigureDevice(pDev->HIFDevice, > HIF_DEVICE_GET_IRQ_YIELD_PARAMS, > @@ -815,7 +815,7 @@ > sizeof(pDev->HifScatterInfo)); > > if (A_FAILED(status)) { > - AR_DEBUG_PRINTF(ATH_DEBUG_WARN, > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO, > ("AR6K: ** HIF layer does not support scatter requests (%d) > \n",status)); > > /* we can try to use a virtual DMA scatter mechanism using legacy > HIFReadWrite() */ > @@ -828,7 +828,7 @@ > } > > } else { > - AR_DEBUG_PRINTF(ATH_DEBUG_ANY, > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO, > ("AR6K: HIF layer supports scatter requests (max scatter > items:%d: maxlen:%d) \n", > DEV_GET_MAX_MSG_PER_BUNDLE(pDev), > DEV_GET_MAX_BUNDLE_LENGTH(pDev))); > } > @@ -852,7 +852,7 @@ > pDev->MaxSendBundleSize = > pDev->HifScatterInfo.MaxTransferSizePerScatterReq; > } > > - AR_DEBUG_PRINTF(ATH_DEBUG_ANY, > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO, > ("AR6K: max recv: %d max send: %d \n", > DEV_GET_MAX_BUNDLE_RECV_LENGTH(pDev), > DEV_GET_MAX_BUNDLE_SEND_LENGTH(pDev))); > > diff -ruN > kernel-2.6.37.6-11.5/drivers/staging/ar6003/htc2/AR6000/ar6k_gmbox.c > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/htc2/AR6000/ar6k_gmbox.c > --- kernel-2.6.37.6-11.5/drivers/staging/ar6003/htc2/AR6000/ar6k_gmbox.c > 2011-05-27 06:16:59.000000000 +0800 > +++ > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/htc2/AR6000/ar6k_gmbox.c > 2011-06-03 05:39:02.823407947 +0800 > @@ -277,7 +277,7 @@ > break; > } > > - AR_DEBUG_PRINTF(ATH_DEBUG_ANY,(" GMBOX Advertised: Address:0x%X , > size:%d \n", > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" GMBOX Advertised: Address:0x%X , > size:%d \n", > pDev->MailBoxInfo.GMboxAddress, > pDev->MailBoxInfo.GMboxSize)); > > status = DevGMboxIRQAction(pDev, GMBOX_DISABLE_ALL, PROC_IO_SYNC); > diff -ruN > kernel-2.6.37.6-11.5/drivers/staging/ar6003/htc2/AR6000/ar6k_gmbox_hciuart.c > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/htc2/AR6000/ar6k_gmbox_hciuart.c > --- > kernel-2.6.37.6-11.5/drivers/staging/ar6003/htc2/AR6000/ar6k_gmbox_hciuart.c > 2011-05-27 06:16:59.000000000 +0800 > +++ > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/htc2/AR6000/ar6k_gmbox_hciuart.c > 2011-06-03 05:39:19.519490737 +0800 > @@ -174,7 +174,7 @@ > > if (A_SUCCESS(status)) { > pProt->CreditsAvailable = pProt->CreditsMax; > - AR_DEBUG_PRINTF(ATH_DEBUG_ANY,("HCI : InitTxCreditState - credits > avail: %d, size: %d \n", > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("HCI : InitTxCreditState - credits > avail: %d, size: %d \n", > pProt->CreditsAvailable, pProt->CreditSize)); > } > > @@ -918,7 +918,7 @@ > props.TailRoom = 0; > props.IOBlockPad = pProt->pDev->BlockSize; > if (pProt->HCIAttached) { > - AR_DEBUG_PRINTF(ATH_DEBUG_ANY,("HCI: notifying attached client > to transport... \n")); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("HCI: notifying attached client > to transport... \n")); > A_ASSERT(pProt->HCIConfig.TransportReady != NULL); > status = pProt->HCIConfig.TransportReady(pProt, > &props, > @@ -1272,9 +1272,9 @@ > AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Failed to enable/disable HCI power > management!\n")); > } else { > if (Enable) { > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("HCI power management > ENABLED!\n")); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("HCI power management > ENABLED!\n")); > } else { > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("HCI power management > DISABLED!\n")); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("HCI power management > DISABLED!\n")); > } > } > > diff -ruN kernel-2.6.37.6-11.5/drivers/staging/ar6003/htc2/htc.c > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/htc2/htc.c > --- kernel-2.6.37.6-11.5/drivers/staging/ar6003/htc2/htc.c 2011-05-27 > 06:16:59.000000000 +0800 > +++ kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/htc2/htc.c > 2011-06-03 05:39:35.643570692 +0800 > @@ -272,7 +272,7 @@ > target->TargetCredits = pRdyMsg->Version2_0_Info.CreditCount; > target->TargetCreditSize = pRdyMsg->Version2_0_Info.CreditSize; > > - AR_DEBUG_PRINTF(ATH_DEBUG_WARN, (" Target Ready: credits: %d credit > size: %d\n", > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO, (" Target Ready: credits: %d credit > size: %d\n", > target->TargetCredits, target->TargetCreditSize)); > > /* check if this is an extended ready message */ > diff -ruN kernel-2.6.37.6-11.5/drivers/staging/ar6003/miscdrv/ar3kconfig.c > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/miscdrv/ar3kconfig.c > --- kernel-2.6.37.6-11.5/drivers/staging/ar6003/miscdrv/ar3kconfig.c > 2011-05-27 06:16:59.000000000 +0800 > +++ > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/miscdrv/ar3kconfig.c > 2011-06-03 05:41:26.548120637 +0800 > @@ -238,7 +238,7 @@ > break; > } > > - AR_DEBUG_PRINTF(ATH_DEBUG_ANY, > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO, > ("AR3K Config: Baud Changed to %d > \n",pConfig->AR3KBaudRate)); > } > > @@ -257,7 +257,7 @@ > break; > } > > - AR_DEBUG_PRINTF(ATH_DEBUG_ANY, > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO, > ("AR3K Config: Baud changed to %d for AR6K\n", > pConfig->AR3KBaudRate)); > } > > @@ -362,7 +362,7 @@ > AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Patch Download Failed!\n")); > } > > - AR_DEBUG_PRINTF(ATH_DEBUG_ANY,("TLPM - PwrMgmtEnabled=%d, > IdleTimeout=%d, WakeupTimeout=%d\n", > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("TLPM - PwrMgmtEnabled=%d, > IdleTimeout=%d, WakeupTimeout=%d\n", > pConfig->PwrMgmtEnabled, > pConfig->IdleTimeout, > pConfig->WakeupTimeout)); > diff -ruN > kernel-2.6.37.6-11.5/drivers/staging/ar6003/miscdrv/ar3kps/ar3kpsconfig.c > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/miscdrv/ar3kps/ar3kpsconfig.c > --- kernel-2.6.37.6-11.5/drivers/staging/ar6003/miscdrv/ar3kps/ar3kpsconfig.c > 2011-05-27 06:16:59.000000000 +0800 > +++ > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/miscdrv/ar3kps/ar3kpsconfig.c > 2011-06-03 05:41:13.408055479 +0800 > @@ -205,7 +205,7 @@ > } > > snprintf(config_path, MAX_FW_PATH_LEN, "%s%s",path,PsFileName); > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%x: FPGA/ASIC PS File Name %s\n", > DevType,config_path)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%x: FPGA/ASIC PS File Name %s\n", > DevType,config_path)); > /* Read the PS file to a dynamically allocated buffer */ > if(A_REQUEST_FIRMWARE(&firmware,config_path,firmwareDev) < 0) { > AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s: firmware file open error\n", > __FUNCTION__ )); > @@ -238,7 +238,7 @@ > else { > status = 0; > } > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Patch File Name %s\n", config_path)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Patch File Name %s\n", config_path)); > if((patchFileName == NULL) || > (A_REQUEST_FIRMWARE(&firmware,config_path,firmwareDev) < 0)) { > AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s: firmware file open error\n", > __FUNCTION__ )); > /* > @@ -416,7 +416,7 @@ > { > /* Read Contents of BDADDR file if user has not provided any > option */ > snprintf(config_path,MAX_FW_PATH_LEN, "%s%s",path,BDADDR_FILE); > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Patch File Name %s\n", config_path)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Patch File Name %s\n", config_path)); > if(A_REQUEST_FIRMWARE(&firmware,config_path,firmwareDev) < 0) { > AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s: firmware file open > error\n", __FUNCTION__ )); > status = 1; > @@ -486,7 +486,7 @@ > #endif /* HCI_TRANSPORT_SDIO */ > > A_STATUS ReadPSEvent(A_UCHAR* Data){ > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" PS Event %x %x > %x\n",Data[4],Data[5],Data[3])); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" PS Event %x %x > %x\n",Data[4],Data[5],Data[3])); > > if(Data[4] == 0xFC && Data[5] == 0x00) > { > diff -ruN > kernel-2.6.37.6-11.5/drivers/staging/ar6003/miscdrv/ar3kps/ar3kpsparser.c > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/miscdrv/ar3kps/ar3kpsparser.c > --- kernel-2.6.37.6-11.5/drivers/staging/ar6003/miscdrv/ar3kps/ar3kpsparser.c > 2011-05-27 06:16:59.000000000 +0800 > +++ > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/miscdrv/ar3kps/ar3kpsparser.c > 2011-06-03 05:41:00.963993772 +0800 > @@ -418,7 +418,7 @@ > } > //pCharLine +=5; > PsTagEntry[TagCount].TagId = > uReadDataInSection(pCharLine, stPS_DataFormat); > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" TAG ID %d > \n",PsTagEntry[TagCount].TagId)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" TAG ID %d > \n",PsTagEntry[TagCount].TagId)); > > //AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("tag # %x\n", > PsTagEntry[TagCount].TagId); > if (TagCount == 0) > @@ -450,7 +450,7 @@ > } > PsTagEntry[TagCount].TagLen = ByteCount; > PsTagEntry[TagCount].TagData = > (A_UINT8*)A_MALLOC(ByteCount); > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" TAG Length %d Tag > Index %d \n",PsTagEntry[TagCount].TagLen,TagCount)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" TAG Length %d Tag > Index %d \n",PsTagEntry[TagCount].TagLen,TagCount)); > stReadStatus.uSection = 3; > stReadStatus.uLineCount = 0; > } > @@ -544,7 +544,7 @@ > LineRead++; > } > Tag_Count = TagCount; > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Number of Tags %d\n", Tag_Count)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Number of Tags %d\n", Tag_Count)); > } > > > @@ -639,7 +639,7 @@ > } > count = 0; > while(ByteCount_Org > MAX_BYTE_LENGTH){ > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" Index [%d]\n",j)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Index [%d]\n",j)); > for (i = 0,k=0; i < MAX_BYTE_LENGTH*2; i += 2,k++,count +=2) { > if(GetNextTwoChar(patchbuffer,patchlen,&filepos,Byte) == A_ERROR) > { > return A_ERROR; > @@ -655,7 +655,7 @@ > if(j == 0){ > j++; > } > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,(" Index [%d]\n",j)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,(" Index [%d]\n",j)); > for (k=0; k < ByteCount_Org; i += 2,k++,count+=2) { > if(GetNextTwoChar(patchbuffer,patchlen,&filepos,Byte) == A_ERROR) { > return A_ERROR; > @@ -686,7 +686,7 @@ > > if(NULL != srcbuffer && srclen != 0) > { > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("File Open Operation Successful\n")); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("File Open Operation Successful\n")); > > status = AthParseFilesUnified(srcbuffer,srclen,MB_FILEFORMAT_PATCH); > } > @@ -701,7 +701,7 @@ > for(i=0; i<Tag_Count; i++){ > if(PsTagEntry[i].TagId == 1){ > BDADDR_Present = A_OK; > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BD ADDR is > present in Patch File \r\n")); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BD ADDR is > present in Patch File \r\n")); > > } > if(PsTagEntry[i].TagLen % 2 == 1){ > @@ -715,11 +715,11 @@ > } > > if(Tag_Count > 0 && !BDADDR_Present){ > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BD ADDR is not present > adding 10 extra bytes \r\n")); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BD ADDR is not present > adding 10 extra bytes \r\n")); > Total_tag_lenght=Total_tag_lenght + 10; > } > Total_tag_lenght = Total_tag_lenght+ 10 + (Tag_Count*4); > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("** Total Length %d\n",Total_tag_lenght)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("** Total Length > %d\n",Total_tag_lenght)); > > > return status; > @@ -789,46 +789,46 @@ > Crc |= RAM_PATCH_REGION; > if(Tag_Count > 0) > Crc |= RAM_PS_REGION; > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("PS Thread Started CRC %x Patch Count %d > Tag Count %d \n",Crc,Patch_Count,Tag_Count)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("PS Thread Started CRC %x Patch Count %d > Tag Count %d \n",Crc,Patch_Count,Tag_Count)); > > if(Patch_Count || Tag_Count ){ > NumcmdEntry+=(2 + Patch_Count + Tag_Count); /* CRC Packet + PS Reset > Packet + Patch List + PS List*/ > if(Patch_Count > 0) { > NumcmdEntry++; /* Patch Enable Command */ > } > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Num Cmd Entries %d Size %d > \r\n",NumcmdEntry,(A_UINT32)sizeof(PSCmdPacket) * NumcmdEntry)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Num Cmd Entries %d Size %d > \r\n",NumcmdEntry,(A_UINT32)sizeof(PSCmdPacket) * NumcmdEntry)); > (*HciPacketList) = A_MALLOC(sizeof(PSCmdPacket) * NumcmdEntry); > if(NULL == *HciPacketList) { > AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("memory allocation failed > \r\n")); > } > AthPSCreateHCICommand(PS_VERIFY_CRC,Crc,*HciPacketList,numPackets); > if(Patch_Count > 0){ > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("*** Write Patch**** \r\n")); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("*** Write Patch**** \r\n")); > > AthPSCreateHCICommand(WRITE_PATCH,Patch_Count,*HciPacketList,numPackets); > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("*** Enable Patch**** \r\n")); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("*** Enable Patch**** > \r\n")); > > AthPSCreateHCICommand(ENABLE_PATCH,0,*HciPacketList,numPackets); > } > > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("*** PS Reset**** %d[0x%x] > \r\n",PS_RAM_SIZE,PS_RAM_SIZE)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("*** PS Reset**** %d[0x%x] > \r\n",PS_RAM_SIZE,PS_RAM_SIZE)); > > AthPSCreateHCICommand(PS_RESET,PS_RAM_SIZE,*HciPacketList,numPackets); > if(Tag_Count > 0){ > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("*** PS Write**** \r\n")); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("*** PS Write**** \r\n")); > > AthPSCreateHCICommand(PS_WRITE,Tag_Count,*HciPacketList,numPackets); > } > } > if(!BDADDR){ > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("BD ADDR not present \r\n")); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("BD ADDR not present \r\n")); > > } > for(count = 0; count < Patch_Count; count++) { > > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Freeing Patch Buffer %d > \r\n",count)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Freeing Patch Buffer %d > \r\n",count)); > A_FREE(RamPatch[Patch_Count].Data); > } > > for(count = 0; count < Tag_Count; count++) { > > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Freeing PS Buffer %d \r\n",count)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Freeing PS Buffer %d \r\n",count)); > A_FREE(PsTagEntry[count].TagData); > } > > @@ -858,7 +858,7 @@ > for(i=0;i< Param1;i++){ > > HCI_PS_Command = (A_UCHAR *) > A_MALLOC(RamPatch[i].Len+HCI_COMMAND_HEADER); > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Allocated Buffer Size > %d\n",RamPatch[i].Len+HCI_COMMAND_HEADER)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("Allocated Buffer Size > %d\n",RamPatch[i].Len+HCI_COMMAND_HEADER)); > if(HCI_PS_Command == NULL){ > AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("MALLOC Failed\r\n")); > return A_ERROR; > @@ -945,7 +945,7 @@ > case PS_VERIFY_CRC: > Length = 0x0; > > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("VALUE of CRC:%d At > index %d\r\n",Param1,*index)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("VALUE of CRC:%d At > index %d\r\n",Param1,*index)); > > HCI_PS_Command = (A_UCHAR *) > A_MALLOC(Length+HCI_COMMAND_HEADER); > if(HCI_PS_Command == NULL){ > diff -ruN kernel-2.6.37.6-11.5/drivers/staging/ar6003/os/linux/ar6000_drv.c > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/os/linux/ar6000_drv.c > --- kernel-2.6.37.6-11.5/drivers/staging/ar6003/os/linux/ar6000_drv.c > 2011-05-27 06:17:00.000000000 +0800 > +++ > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/os/linux/ar6000_drv.c > 2011-06-03 05:43:23.576700939 +0800 > @@ -1689,8 +1689,8 @@ > param |= (mac_addr_method << HI_OPTION_MAC_ADDR_METHOD_SHIFT); > param |= (firmware_bridge << HI_OPTION_FW_BRIDGE_SHIFT); > > - A_PRINTF("NUM_DEV=%d FWMODE=0x%x FWBR_BUF %d\n", num_device, fwmode, > - firmware_bridge); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("NUM_DEV=%d FWMODE=0x%x FWBR_BUF > %d\n", num_device, fwmode, > + firmware_bridge)); > > if (BMIWriteMemory(ar->arHifDevice, > HOST_INTEREST_ITEM_ADDRESS(ar->arTargetType, hi_option_flag), > @@ -2046,7 +2046,7 @@ > goto avail_ev_failed; > } > > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() Got WMI @ 0x%08x.\n", > __func__, > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s() Got WMI @ 0x%08x.\n", > __func__, > (unsigned int) arPriv->arWmi)); > } > } > @@ -2109,7 +2109,7 @@ > ar->arVersion.target_ver = targ_info.target_ver; > ar->arTargetType = targ_info.target_type; > > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() TARGET TYPE: %d\n", > __func__,ar->arTargetType)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s() TARGET TYPE: %d\n", > __func__,ar->arTargetType)); > target_register_tbl_attach(ar->arTargetType); > > /* do any target-specific preparation that can be done through > BMI */ > @@ -3110,7 +3110,7 @@ > goto ar6000_init_done; > } > > - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("%s() WMI is ready\n", __func__)); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("%s() WMI is ready\n", __func__)); > > /* init PAL driver after WMI is ready */ > if(setuphcipal) > @@ -5613,7 +5613,7 @@ > void > ar6000_regDomain_event(AR_SOFTC_DEV_T *arPriv, A_UINT32 regCode) > { > - A_PRINTF("AR6000 Reg Code = 0x%x\n", regCode); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("AR6000 Reg Code = 0x%x\n", regCode)); > arPriv->arRegCode = regCode; > } > > diff -ruN kernel-2.6.37.6-11.5/drivers/staging/ar6003/reorder/rcv_aggr.c > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/reorder/rcv_aggr.c > --- kernel-2.6.37.6-11.5/drivers/staging/ar6003/reorder/rcv_aggr.c > 2011-05-27 06:17:00.000000000 +0800 > +++ > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/reorder/rcv_aggr.c > 2011-06-03 05:47:47.810011220 +0800 > @@ -62,7 +62,7 @@ > p_aggr->rx_fn = fn; > p_aggr->netbuf_allocator = netbuf_allocator; > p_aggr->netbuf_allocator(&p_aggr->freeQ, AGGR_NUM_OF_FREE_NETBUFS); > - A_PRINTF("aggr_init....status OK\n"); > + AR_DEBUG_PRINTF(ATH_DEBUG_INFO,("aggr_init....status OK\n")); > return A_OK; > } > > diff -ruN kernel-2.6.37.6-11.5/drivers/staging/ar6003/wmi/wmi.c > kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/wmi/wmi.c > --- kernel-2.6.37.6-11.5/drivers/staging/ar6003/wmi/wmi.c 2011-05-27 > 06:17:00.000000000 +0800 > +++ kernel-2.6.37.6-11.5_mod_log_reduced/drivers/staging/ar6003/wmi/wmi.c > 2011-06-03 05:48:14.714144622 +0800 > @@ -1003,7 +1003,7 @@ > break; > #endif /* CONFIG_TARGET_PROFILE_SUPPORT */ > default: > - A_DPRINTF(DBG_WMI|DBG_ERROR, > + A_DPRINTF(DBG_WMI, > (DBGFMT "Unknown id 0x%x\n", DBGARG, id)); > wmip->wmi_stats.cmd_id_err++; > status = A_ERROR; > @@ -1383,7 +1383,7 @@ > break; > > default: > - A_DPRINTF(DBG_WMI|DBG_ERROR, > + A_DPRINTF(DBG_WMI, > (DBGFMT "Unknown id 0x%x\n", DBGARG, id)); > wmip->wmi_stats.cmd_id_err++; > status = A_ERROR; > _______________________________________________ > MeeGo-kernel mailing list > [email protected] > http://lists.meego.com/listinfo/meego-kernel > > _______________________________________________ MeeGo-kernel mailing list [email protected] http://lists.meego.com/listinfo/meego-kernel
