arty, to fit the r200 you need 260z stubs(the ones that come out of the diff ,4 bolt clip in flange) standard 1600 or 180b half shalfts (i think, still in the prosess of fitting mine) also you need a modified transvers leaf which i think sss automotive sell for about $70.also need to grind out a bit out of the rear x-member where the diff goes through on bottom lip so the diff clears only about 1/2 an inch. one last thing , the tailshaft flange on the back of the diff is different compared to the r180. matt -----Original Message----- From: Arty P <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: Friday, 16 June 2000 10:26 Subject: R200 >hey there yeah i'm interested in the diff, ummm gimme a break but i'm kinda new to all this but how much would it be worth? if so what r u asking ? ummm i know that the r200 takes some mods to fit. what r these mods?? >thanks > >_____________________________________________________________ >Get Your free Ozdat Email Account >---> http://www.ozdat.com --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.datascribe.com.au/ozdatonline/index.htm http://www.datascribe.com.au/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
