this is what i did with my 1200 coupe
rolled it on it's side
Heath
----- Original Message -----
From: "malcolm cooper" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, 7 August 2000 8:39
Subject: Re: Seam welding
> I have done one or two,
>
> strip it out to a bare shell and weld 1" welds every 1" apart at every
> place you can see two or three bits of steel meet,yes it's a far bit of
> work.
>
> They dont weight much stripped out so two people can put it on it's
> side,very easy this way.
>
> Malcolm
>
> Paul Henningham wrote:
> >
> > Me again
> > OK i want to seam weld my 510 so can anybody out there give me some
advice i have at the gear (MIG ETC )
> > so if anbody can give me any tips thanks :-)
> >
> > _____________________________________________________________
> > Get Your free Ozdat Email Account
> > ---> http://www.ozdat.com
> >
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
