So what other cars use the same swing arm? 180B and 1600, aren't the 6cyls
a different size?
At 08:38 1/09/00 +1000, you wrote:
>Adam,
>small bends are hard to see and can easily give 5mm toe. The only way to
>check is to remove the arm and compare with an arm that is known to be good
>Cheers
>Feral Errol
>
>----------
>From: Adam <[EMAIL PROTECTED]>
>To: [EMAIL PROTECTED]
>Subject: Rear Toe In.
>Date: Thursday, August 31, 2000 7:57
>
>I took the car back to the suspension place to check the settings. They
>were fine, but it appears I have 5mm of toe in on the rear-drivers side
>wheel. This may not be the cause of the problem but it can't be good for
>stability back there. Now I have a question, none of the mounts were
>loose, ie no movement in the swing arm to subframe, and both rear
>suspensions are the same height. I couldn't see any bends or damage to the
>swing arms. So where is this extra toe coming from?
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
