I fitted the Nolethane brand ones.
I had to take the arms to the engineers to get the old bush's out.
the arms expanded with the removall of the old bushs.
When I went to fit the new bushs their was a bit of slop.
Fixed,Model kitset (hobby shops) sell brass sheeting in a few different
thinkness,these make great shims,and if done with care they are fine.
Nylex/lock nuts are made to be done up once only,When you take it off it
is stuffed.
NEVER USE A NYLEX/LOCK NUT TWICE.
Malcolm
Adam wrote:
>
> Yes I am still on this topic. What bushes do you use for the arm to
> subframe pivot, rubber or nolethane, and what part number? The manual says
> to replace the lock nuts every time you reinstall the arm. What type are
> they and where can you get them?
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
