|
Is it carby
setup?
U not just make the
turbo a carby blow through. Then all you gotta do is get the bits made up at an
exhaust shop. Should be cheap as.. :)
Shouldn't be too tricky
if you get them to make up some extractors to feed into the turbo, then hook up
to a large exhaust system, make your blow side of the turbo blow through the
carby with some simple exhaust bends and joints and through your existing
manifold. You could pretty much safely run up to 7 psi without any other
mods.
--membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ --------------------------------------------------------------------- |
- Turbo Manifold David Costello
- Re: Turbo Manifold Heath
- Re: Turbo Manifold Scott
- Re: Turbo Manifold David Costello
- Re: Turbo Manifold Geordie Smith
- Re: Turbo Manifold Heath
- Re: Turbo Manifold Heath
- Re: Turbo Manifold David Costello
- RE: Turbo Manifold Geordie Smith
- Re: Turbo Manifold David Costello
- Re: Turbo Manifold Wayne Jones
- Re: Turbo Manifold David Costello
- Re: Turbo Manifold Heath
- Re: Turbo Manifold Heath
- Re: Turbo Manifold Heath
