>From the center split??
cause with all the Z18 boxes I have seen you can't remove the
bellhousing??
Errol Smith wrote:
> Daniel,
> Fit a Z18 bell housing to the box.
> Cheers
> Feral Errol
> WWW.Datrats.com.au
>
> ----------
> From: Daniel Kroehn <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> Date: Thursday, November 16, 2000 11:47
>
> Errol,
>
> What exactly has to be done to get the head sitting on the right angle?
> Also will this affect the position of the gearbox relative to its current
> postion?
>
> Daniel Kroehn
>
> Supporting Datrats
> WWW.Datrats.com.au
>
> ----- Original Message -----
> From: Errol Smith <[EMAIL PROTECTED]>
> To: <[EMAIL PROTECTED]>
> Sent: Thursday, November 16, 2000 6:08 AM
> Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
>
> > Mick,
> > Well it is a straight bolt up, but needs to be bolted in a slightly
> > different position. Nothing too difficult.
> > Cheers
> > Feral Errol
> > WWW.Datrats.com.au
> >
> > ----------
> > From: Mick Ralph <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED]
> > Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > Date: Wednesday, November 15, 2000 23:26
> >
> > Errol
> > I thought that the Z head would be almost a straight bolt up type of set
> > up.
> > You (I) learn something new every day..
> > thanks mate
> > cheers
> > Mick
> >
> > ----- Original Message -----
> > From: Errol Smith <[EMAIL PROTECTED]>
> > To: <[EMAIL PROTECTED]>
> > Sent: Wednesday, November 15, 2000 5:03 PM
> > Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> >
> >
> > > Mick,
> > > Thats a good idea, but you need to decompress your L series before
> > fitting
> > > the Z18ET head and manifolds. You should also change the angle of the
> > block
> > > as the oil returns need the block to be inclined to prevent oil build
> up
> > > over the valve stem seals
> > > Cheers
> > > Feral Errol
> > > WWW.Datrats.com.au
> > >
> > > ----------
> > > From: Mick Ralph <[EMAIL PROTECTED]>
> > > To: [EMAIL PROTECTED]
> > > Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > > Date: Wednesday, November 15, 2000 12:37
> > >
> > > Daniel
> > > U could just put a Z head onto an L series block.. then u could keep
> the
> > > same gearbox and even the same engine number..
> > > I think thats what i am going to do
> > > cheers
> > > mick
> > >
> > > ----- Original Message -----
> > > From: Daniel Kroehn
> > > To: [EMAIL PROTECTED]
> > > Sent: Monday, November 13, 2000 4:07 PM
> > > Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > >
> > >
> > > Thanks for that Zac, a few people had told me otherwise. I think
> I'll
> > > have to go for an aftermarket comp. or find a complete package, not
> > having
> > > much luck though.
> > >
> > > Daniel Kroehn
> > > ----- Original Message -----
> > > From: Zac Campbell
> > > To: [EMAIL PROTECTED]
> > > Sent: Monday, November 13, 2000 3:13 PM
> > > Subject: Re: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > >
> > >
> > > Sorry, but you do need a gearbox!
> > > The Z18 sits on an angle (8 degrees from memory) and thus the gear
> > > selector will point towards the passenger.
> > > I have seen a Z18 in a 1600 with an L-series box, but the owner had
> > > angled the engine instaed. it looked hideous. 1/2 the strut tower was
> > > sledge hammered to clear the inlet manifold!
> > >
> > > zac
> > >
> > > ----- Original Message -----
> > > From: Daniel Kroehn
> > > To: [EMAIL PROTECTED]
> > > Sent: Monday, November 13, 2000 1:50 PM
> > > Subject: NEEDED Z-18et COMPUTER AND WIRING HARNESS
> > >
> > >
> > > List,
> > >
> > > I've found a Z-18et for a really good price without the box or
> the
> > > computer and harness. Everything else is there. I already have a few
> L
> > > series boxes at home so I don't need a gearbox but I do need a HARNESS
> > and
> > > COMPUTER. If any of you guys who have put aftermarket computer on your
> > > zeds have one lying around and are willing to sell it, could you write
> > > back.
> > >
> > > I JUST DON'T WANT TO LET THIS ONE SLIP THROUGH MY FINGERS, BUT
> I'LL
> > > HAVE TO IF I CAN'T GET A COMPUTER AND HARNESS
> > >
> > > Thanks
> > >
> > >
> > > Daniel Kroehn
> > >
> > >
> > --membersozdat------------------------------------------------------
> > -
> > >
> > > OZDAT Mailing List Please Note:-
> > > Send (un)subscribe requests to [EMAIL PROTECTED]
> > > Send submissions to [EMAIL PROTECTED]
> > > No unauthorised redistribution of this email
> > > http://www.ozdat.com/ozdatonline/index.htm
> > > http://www.ozdat.com/ozdatonline/listindex.html
> > > http://www.mail-archive.com/[email protected]/
> > >
> > --------------------------------------------------------------------
> > -
> > >
> >
> --membersozdat-------------------------------------------------------
> > > OZDAT Mailing List Please Note:-
> > > Send (un)subscribe requests to [EMAIL PROTECTED]
> > > Send submissions to [EMAIL PROTECTED]
> > > No unauthorised redistribution of this email
> > > http://www.ozdat.com/ozdatonline/index.htm
> > > http://www.ozdat.com/ozdatonline/listindex.html
> > > http://www.mail-archive.com/[email protected]/
> >
> ---------------------------------------------------------------------
> > >
> > > --membersozdat-------------------------------------------------------
> > > OZDAT Mailing List Please Note:-
> > > Send (un)subscribe requests to [EMAIL PROTECTED]
> > > Send submissions to [EMAIL PROTECTED]
> > > No unauthorised redistribution of this email
> > > http://www.ozdat.com/ozdatonline/index.htm
> > > http://www.ozdat.com/ozdatonline/listindex.html
> > > http://www.mail-archive.com/[email protected]/
> > > ---------------------------------------------------------------------
> > >
> > >
> > >
> >
> >
> >
>
--
________________________________________________________________________
James Fitness
Director
Data Scribe Australia Pty Ltd
http://www.datascribe.com.au
Computers and Supplies
OZDAT Online
http://www.datascribe.com.au/ozdatonline/index.htm
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
