We tried the local wolf dealers but they dont like to give to much info away
but they'll do it for a fee.I tried to contact brett from formaz but
apparently he's working in another workshop owned by formaz.Anyone know where
he is?Anyway looks like i'll have to do a bit of brain sucking research and
figure it out.Have you got a contact number for steve.
Andrew Smith
M & J Pacey wrote:
> Andrew i ran one of these dizzy's in my injected A series using a Wolf 3D
> contact your nearest Wolf supplier, from memory you have to fit a small
> resistor between the leads from the dizzy. Steve Newing from Speed
> Technology might also be able to help.
> -----Original Message-----
> From: andrew smith <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Wednesday, March 07, 2001 1:58 AM
> Subject: fj20t dizzy
>
> >A mate has just fitted an FJ20t into his 1200 coupe race car.It was one
> >of my old motors that I had sold to a guy who ran it in a Bluebird
> >sports sedan for a couple of seasons.I had set the dizzy up with a
> >haltec chopper plate to alter the signal so it could be read by a haltec
> >comp but the guy I sold it to run a fuel only 2d wolf so he binned the
> >standard dizzy and ran a pulsar fixed dizzy.Can anyone help with how to
> >wire this up so it will run with a 3d wolf.Is there anything else that
> >he needs or any other suggestions.Thanks
> >Andrew Smith
> >
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
