trev 

where did you get it?? this may give hints as to its identity/origin?

andrew

> Bruce,
> 
> Thanks very much for reminding me of that link.
> My next question to the list has now been partially answered.
> 
> Extract from Link as follows:
> 
> 219 closed chamber Head.
> 
> The true SSS head from imported used engines or ordered from the Datsun
> comp. catalog. Later versions could be ordered from the catalog with a V912
> casting. 1.50" intake ports, square exhuast ports. 1.65" intake valves and
> 1.38" exhuast. These are hard to find. Any of the other closed chamber heads
> can be "converted' to this design by simply opening up the intake port to
> 1.50" (if that's desired) Some of these heads are marked "A87" on the side,
> but have "219" cast at the front of the head, just below the timing chain
> inspection plate.
> 
> It seems a mystery head I have has now been identified.
> My head is simular to the one above ie 1.5" inlet ports, 1.65" intake
> valves, closed chamber and has 219 cast on the front below the timing chain
> inspection plate.
> 
> My head differs though in a few areas:
> 
> Exhaust valves are smaller and are 1.3" (33mm). There is 3-4 Punch marks
> around valve seats. Because of this I assume that the valve seats were
> replaced at some stage so maybe they opted for smaller exhaust valves. 
> 
> There is A87, V91 etc casting on the spark plug side and there is only
> original casting in this area. ie casting numbers have not been machined
> off. 
> 
> If you have a look at the picture in the link under the inlet points and
> between the manifold and block surfaces there is a "ramp" or casting
> strengthing section. This head does not have this and all other L4 heads I
> have seen do.
> 
> On the rocker cover gasket surface and above number 2 inlet port AV has been
> stamped. Above number 4 inlet port X is stamped.
> 
> On the back what looks like, NO 1 9-29 is cast just above the block. 45 is
> stamped above this to the right.
> 
> Anyone have any ideas what this head is?
> 
> I am now assuming it is a SSS head???????
> 
> Trev 
> 
> 
> -----Original Message-----
> From: Bruce Ferguson [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, 21 March 2001 11:54
> To: [EMAIL PROTECTED]
> Subject: Heads.. Trevor
> 
> 
> Trev,
> 
> I found this web site, has some interesting facts on L
> series heads, you might find it useful.
> 
> http://bre510.com/resources.htm
> 
> Regards
> 
> Bruce
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Get email at your own domain with Yahoo! Mail. 
> http://personal.mail.yahoo.com/
> 
> 


--membersozdat-------------------------------------------------------
OZDAT Mailing List   Please Note:-
Send (un)subscribe requests to  [EMAIL PROTECTED]
Send  submissions to  [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------

Reply via email to