Andrew,
I have 240K struts, the calipers are off a '94 landcruser which are the same
as the Hilux one's but newer so less chance of a rebuild. I can't remember how big
the disks are as I did it well over 12 months ago, sorry.
Daniel
-----Original Message-----
From: andrew smith [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 22 May 2001 10:09 PM
To: [EMAIL PROTECTED]
Subject: Re: brakes
Daniel,
What struts do you have?Are all the landcruiser calipers the same if not what model
did you use?What dia did the disks end up and how thick are the?
Andrew Smith
"Wisniewski, Daniel (D.)" wrote:
> I've got that setup on my 1600, they are honda disks I'm not sure of the part #, you
>have to open the hole up in the centre of the hub as well as machine the outside of
>the disk down a little bit.
>
> Cheers
> Daniel
>
> -----Original Message-----
> From: andrew smith [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, 22 May 2001 10:04 AM
> To: [EMAIL PROTECTED]
> Subject: brakes
>
> Has anyone on the list used the hilux/landcruiser 4 spots to suit vented
> disks?If so what disks were used and what was involved in fitting them.I
> have a set of volvo atc 4 spots but dont really want to make brakets to
> suit there bolt spacing.Any other suggestions as i want to use vented
> disks.A mate has just fitted the hilux to solid disk setup and cooked
> them in 3 sprints.
> Andrew Smith
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
