James,
Well done, this doesn't even seem all that difficult either - one to file in
the technical section.
Let us know have they perform on the road when you get it hooked up.
regards
Terry
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of James Empson
Sent: Saturday, 23 June 2001 7:13
To: [EMAIL PROTECTED]
Subject: Datsun 1000 disc brakes
Gday Listers, After spending alot of quality time with the sheep at Dunkers
U-Pull-It, I've figured out how to fit disc brakes on the front of a datsun
1000 (B10) . My solution is : Late model 120Y (1975ish) hubs and disc's
(219mm diameter) which bolt straight onto the 1000 stub axles. Then get a GE
Chrysler Sigma (the sigma with fake air vents on the gaurds), grab the
calipers and caliper mounts, re-drill the caliper mounts to suit the 1000
stub axles (using the old drum brake as a template). Machine 2 mm off the
heads of the 4 bolts that hold the caliper mount onto the stub axles, then
assemble.
Hopefully the engineer will OK an A14 with these brakes up front.
James.
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
