RE: Z18ET Valve Clearances.

[E Smith]

Title: RE: Z18ET Valve Clearances.

Z18ET is the same. Measured between valve stem and screw lash adjuster on the end of the rocker arm. Cold adjustment is 0.008” inlet and 0.009” exhaust (@ 20 degrees C).   Cheers, Feral Errol mailto:[EMAIL PROTECTED] http://www.datrats.com.au/   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Rowe, Adam Sent: Friday, 30 November 2001 2:48 PM To: [EMAIL PROTECTED] Subject: RE: Z18ET Valve Clearances.   Thanks Errol.  So there is no difference between the Z18 N/A and Z18ET valve settings.  And that distance is between the valve top and actuater not the cam. -----Original Message----- From:   E Smith [SMTP:[EMAIL PROTECTED]] Sent:   30/11/2001 13:06 To:     [EMAIL PROTECTED] Subject:        RE: Z18ET Valve Clearances. ADAM, It says 0.012"  inlet and exhaust hot,  for Z16, Z18, Z20 and Z24 in the Nissan Z series workshop manual.   Cheers, Feral Errol <mailto:[EMAIL PROTECTED]> <http://www.datrats.com.au/>   -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Rowe, Adam Sent: Friday, 30 November 2001 1:46 PM To: [EMAIL PROTECTED] Subject: RE: Z18ET Valve Clearances.   Don't they have a different cam design and geometry?  I thought these would effect the measurements.  As they also have different timing chain lengths.  But the numbers still sound right. -----Original Message----- From:   Terry Rudd [SMTP:[EMAIL PROTECTED]] Sent:   30/11/2001 10:26 To:     [EMAIL PROTECTED] Subject:        RE: Z18ET Valve Clearances. Adam,   AFAIK Z's are the same as most L's   Hot In 0.25 mm (0.010") Ex 0.30 mm (0.012")   Cold In 0.20 mm (0.008") Ex 0.25 mm (0.010")   regards Terry -----Original Message----- From: [EMAIL PROTECTED] [ <mailto:[EMAIL PROTECTED]>]On Behalf Of Rowe, Adam Sent: Friday, 30 November 2001 9:56 AM To: ozdat Subject: Z18ET Valve Clearances. Does anyone know the valve clearances for a stock Z18ET? Adam Rowe --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------