|
Will this work on the combustion chambers as
well or should I just get a small 200 grit flapwheel? Do youy guys agree
with finishing the intake ports with 80 grit paper and the exhausts with
something really fine?
Cheers
Daniel (Hoping to make his turbocharged dreams
true soon) Kroehn
----- Original Message -----
Sent: Monday, December 03, 2001 3:25
PM
Subject: RE: mandrels and abrasive
sleeves
Daniel,
Get
some �” rod and cut a slot in one end about 25mm in length. Tear a 30-35 mm strip of cloth backed
emery into a strip about 250 in length. Out one end in the slot and wind the
the cloth onto the rodin the direction of normal rotation with the abrasive on
the out side.
A lot
cheaper to use.
Cheers,
Feral
Errol
mailto:[EMAIL PROTECTED]
http://www.datrats.com.au/
-----Original
Message-----
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Daniel Kroehn
Sent: Monday, 3 December 2001 1:22
PM
To:
[EMAIL PROTECTED]
Subject: mandrels and abrasive
sleeves
Here's
a question for all you DIY head reconditioners,
I've
done a a bit of port enlargeing on my Z18 head and want to finish off the
ports and combustion chambers properly but no one in town sells the little
mandrels and abrasive sleeves for 1/4 inch die grinders. I was wondering
if any of you guys know where to get them or even little kits for doing such
jobs?
any
help will be hugely appreciated as I want to get the head back together
asap!
Daniel
Kroehn
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
--------------------------------------------------------------------- |
