Re: wheels

[Daniel Kroehn]

From what I've been able to dig up, the 1600's in standard guise will only accept from 0 - +25mm offset to accept a 7 inch rim.  If a 35mm offset rim will fit a 1600 properly then it will be a lot easier to find aftermarket rims for one as 35mm offset is a pretty common rim nowadays.   Cheers   Daniel Kroehn ----- Original Message ----- From: Julian To: [EMAIL PROTECTED] Sent: Thursday, December 27, 2001 9:44 AM Subject: Re: wheels Yes, TRX and skyline wheels are popular options.  As someone else said, anything from a RWD datsun (or nissan) with the same stud (4 x 114 i think its called) pattern should do the job. AFAIK no 16" factory wheels would fit because nissan have now gone for the 5 stud pattern like on the 200SX etc. Im pretty sure the skyline offset is 35mm and Im assuming its the same on the 1600.  Someone else here will know for sure. - Julian Daniel Kroehn wrote: List, I know this is a question that goes around from time to time but its one thin that confuses me.  I'm looking at getting a set of new wheels for the ol' 1600 as I'm getting a bit tired of the 13's I have on it at the moment.  What stud spacing and offset should I be looking out for that suit my car?  I'm looking at getting some 16 x 7's if I can find some that suit.  My guards have already been rolled a little and have the lips already turned up.  Is there any AFTERMARKET wheels that fit other cars that will bolt straight onto my datto.  ie.  Would a set of aftermarket wheels made for a TRX bluebird suit the 1600? Any help will be appreciated. Merry Christmas Daniel Kroehn --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------