Water lines for a turbo

[Daniel Kroehn]

Hey guys, I'm routing my water cooling lines for the turbo at the moment and am a bit stuck on where to plumb the return line from the turbo.  Here's my setup, I have the water inlet to the turbo coming from the right hand side of my z-18et (looking from the front) block as I found a plugged water outlet from the block.  The return is where I'm having all my hassles.  There is a provision in the thermostat housing for three inlets.  Two of them will be used for my two temperature senders (one for the wolf and the other for the gauge) and I wanted to use the other for the water return from the turbo. BUT here's my question: will there be low enough pressure there for the water to actually flow back into the system before going back to the radiator or will it just lay dormant in the line?  I realise the water won't flow until the thermostat housing opens but what will happen when it does?   Sorry for the length.   Daniel Kroehn --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------