|
Daniel, Tap the
return line into the inlet for the water pump. This is a low pressure area and
you will have positive water flow. Cheers Feral Errol -----Original Message----- Hey guys, I'm routing my water cooling
lines for the turbo at the moment and am a bit stuck on where to plumb the
return line from the turbo. Here's my setup, I have the water inlet to
the turbo coming from the right hand side of my z-18et (looking from the front)
block as I found a plugged water outlet from the block. The return is
where I'm having all my hassles. There is a provision in the thermostat
housing for three inlets. Two of them will be used for my two temperature
senders (one for the wolf and the other for the gauge) and I wanted to use the
other for the water return from the turbo. BUT here's my question: will there
be low enough pressure there for the water to actually flow back into the
system before going back to the radiator or will it just lay dormant in the
line? I realise the water won't flow until the thermostat housing opens
but what will happen when it does? Sorry for the length. Daniel Kroehn --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ --------------------------------------------------------------------- |
- Water lines for a turbo Daniel Kroehn
- E Smith
