anyone know what the original thickness
of a FJ20DET (DR30 Skyline) flywheel is?
[Terry
Rudd] 30mm
thanks, thats what i need to
know
also, has anybody had clutch issues before
where they were supplied a clutch plate
that fit perfectly but when taken out found the
plate had carved into the flywheel bolts
as in being too tall in the centre
(spring) section?
[Terry Rudd] Never had this problem but with Nismo plates
in the race car the pp side would wear at an alarming rate. We changed
to Performance plates (actually for a Z24 Navara) and never had a
problem after that.
i am able to get a PBR solid centre ceramic
button plate for $170 through the guys who stuffed up the last one (they're
looking
after me on price due to their mistake) it's
also from skylines, navaras, etc.
speaking of which, anyone got any prices of a
decent brass button plate?
in perth it will set me back $263 + GST
just for the plate.
[Terry Rudd] Pretty good price
afaik.
and last but not least... if i have a h/duty
pressure plate only a few hundred k's old
and i had my flywheel machined, would it
be alright to throw in a button plate?
[Terry Rudd] If it's not
scored (and it shouldn't be) I can't think of any reason why not. How much
did they machine off the original plate, more importantly how much under
30mm is it now?
now that i
know the thickness i'll get it measured. i don't have it with me, but
i have a spare in my car at the moment
that came
with my replacement motor.
regards
Terry
cheers
ryan
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to
[EMAIL PROTECTED]
Send submissions to
[EMAIL PROTECTED]
No unauthorised redistribution of this
email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[email protected]/
---------------------------------------------------------------------
