Re: TPS wiring

[Daniel Kroehn]

Title: RE: TPS wiring

Don't know if was a VL or a r31?  The engine (RB30) was sitting on the ground with other engines at the wreckers.  The guy at K.P Perfromance where I got my wolf 3D from said it would suit, so I'm guessing the plug on the front is for idle and WOT switches and the other three wires coming out of the TPS is the earth, power and signal for the variable resistance like you suggested.   Daniel Kroehn ----- Original Message ----- From: Rowe, Adam To: [EMAIL PROTECTED] Sent: Monday, February 18, 2002 12:09 PM Subject: RE: TPS wiring The three prong might be connected to the WOT and Idle switches.  Did you say it was from a VL?  I didn't think they had that style.  Could be something I can use to replace my one which has no variable resistance. -----Original Message----- From:   Daniel Kroehn [SMTP:[EMAIL PROTECTED]] Sent:   18/02/2002 11:06 To:     [EMAIL PROTECTED] Subject:        Re: TPS wiring I'm using the TPS for throttle inrichment and a the in built map sensor to dectect the load.  It has variable resistance across the red and white wires coming out of the tps but I want to know what the three prong plug on the front of it is used for.  Should i risk taking it apart for closer inspection?   Daniel Kroehn ----- Original Message ----- From: Rowe, Adam <mailto:[EMAIL PROTECTED]> To: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> Sent: Monday, February 18, 2002 8:43 AM Subject: RE: TPS wiring Are you using the TPS, with a MAP, to get rid of the AFM?  I think these types of TPS are just tell you Idle and WOT, they are switches not sensors.  Meaning they aren't suitable. -----Original Message----- From:   Daniel Kroehn [ SMTP:[EMAIL PROTECTED] <mailto:SMTP:[EMAIL PROTECTED]>] Sent:   18/02/2002 0:23 To:     [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> Subject:        TPS wiring Hey guys and gals,   I've got an RB30 throttle body and TPS.  It has the three prongs to accept a tps plug on the front of it and also has a lead coming out of it with a red, white and black wire. I need to know which to hook up to the wolf 3d. I am thinking this is the positive, earth and signal wire that I need to hook up to the computer but if this is so, what is the front plug ( which I have seen on every other factory TPS) used for?   Cheers   Daniel Kroehn --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------