About 19 cc from memory Cheers Feral Errol
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Terry Rudd Sent: Saturday, 6 April 2002 12:00 PM To: [EMAIL PROTECTED] Subject: RE: L18 head details The Z18 is also 45.2cc, I'm told that all NAPSz heads are the same which means that a Z24 must have some seriously dished pistons. TR -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of David Costello Sent: Friday, 5 April 2002 9:42 AM To: [EMAIL PROTECTED] Subject: Re: L18 head details whats the head cc size of the Z18? Dave ----- Original Message ----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, April 04, 2002 11:39 PM Subject: RE: L18 head details > Chris, > > L16 210/A87 is 36cc > L16 W53 is 39cc > L18 A87 is 39cc > L20B U67 is 45.2cc > > There are some other heads but these are the common ones. > > regards > Terry > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Chris Simpson > Sent: Thursday, 4 April 2002 11:09 PM > To: [EMAIL PROTECTED] > Subject: L18 head details > > > > Lister > > Does any one know off the top of their head the size of the L18 peanut > heads combustion chamber? in stock form, before milling??? > > As far as i know the L20 is 45.2cc > > Whats the L16 out of interest aswell > > > > Cheers > > Chris > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
