Chris I fitted a Clark rubber profile to the lid section of the boot rather than in the normal channel on the body. It seals just outside the channel and works very well. No water or dust get past it. This method keeps the channel clean and prevents water and dirt build up under the channel rubber which causes rust in the channel. ----- Original Message ----- From: "Chris Simpson" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, 30 April 2002 19:41 PM Subject: Boot Rubbers
> > Listers, > > I recently went into Rare Spares to enquire about boot rubber. The > standard rubber was quoted at $60 ish dollars, cant remember exactly but > the guy there thought that they were crap and didnt do a good job. Clarke > Rubber quoted the original ones at $44, but would have to get them in from > the East. He recommended some stuff off the role, at a cost of about > $6.40/m which works out under $30 for the boot. > > Has any one used this stuff before? > Any one else got any other idea's? > Is the "origional" stuff really that awful? > > Thanks > > Chris > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
