Craig, I haven't done it but I think you may be able to fit the 260Z gears and countershaft into the box leaving the stock 5th and output shaft. They would have to be replaced as a set, as the countershaft gears (apart from the input gear) are all machined on a one-piece forging. You can also change the input gearset ratio from 22 drives 31 to 21 drives 32. This will widen all the first three gears and shorten 5th gear.
Cheers Feral Errol -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Craig Coffey Sent: Friday, 7 June 2002 5:47 AM To: [EMAIL PROTECTED] Subject: Re: quick gearbox question... While we're talking gearboxes, any one know what gears out of what boxes to make up a closer ratio stumpy box? Cheers in advance Craig ----- Original Message ----- From: "Terry Rudd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, June 06, 2002 9:35 PM Subject: RE: quick gearbox question... > yes > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Andrew > Greenbury > Sent: Thursday, 6 June 2002 11:28 AM > To: [EMAIL PROTECTED] > Subject: quick gearbox question... > > > Hi All, > > Was it the MR30 skyline which had the "stumpy" skyline > gearbox?? > > Thanks > Andrew > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
