Re: OFF TOPIC: V6 Injectors & Cams

[mark krawczuk]

hi, they are std maps, any way  the same as with any mods,  you basically  tune the engine to suit the mods ya done.    i`d rather fiddle with a map myself ,  than  get  a `one size fits all` map..............especially if  ya mate is putting a v6  in hilux, the gearing  is different etc......          i have got of the net a obd or is it aldl? cable adapter  schematic ( really simple , uses about 2 transistors and  a couple other parts)           that u plug in to  the  obdII connector underthe  steerin g colum , and a program that  you run  to see the  revs,  vacuum, etc......and a heap of other readings, should come in handy to get the most of the conversion as you can see what is doing what at  different  speeds etc....        mark k ----- Original Message ----- From: andrew smith To: [EMAIL PROTECTED] Sent: Thursday, September 26, 2002 8:40 AM Subject: Re: OFF TOPIC: V6 Injectors & Cams A mate has just bought i wrtten off supercharged vt calais and is about to fit it into a late model hilux ute.He has bought one of those yella tera snouts for the front of the supercharger which give it more boost.Do you have any suitable maps for this setup or are they standard maps. mark krawczuk wrote: hi, i have done a v6 commodore auto). i got a cam and chip package from  Mc claren motor engineering  ( they are on  port road, adelaide) for  AROUND the $400 mark.  the cam and chip were on a exchange basis. the cam didnt seem  that hot , i  DEFINATELY would have gone for one hotter.the thing is , didnt go  much better , cause i found out that the rest of the engine was  a bit knackered.  might pay to ask mc claren , what the specs are and get one hotter,  plus, a ported out throttle body ( i ported out  and polished a throttle body on my vl  commodore,  its easy to do, i`ve seen a throttle body ( not aftermarket one) at  outlaw speed equipment in adelaide , with the  same  porting etc ....done as mine and they wanted $400, ( well, i really reckon it was a lot more than that  come to think  of it..)  i have rom maps for  vn to vx commodore , if ya interested in doing your own remapping......   mark k ----- Original Message ----- From: Wayne Woodall To: [EMAIL PROTECTED] Sent: Wednesday, September 25, 2002 11:06 PM Subject: OFF TOPIC: V6 Injectors & Cams  Listers,    Ok, I am retrofitting an Ecotec V6 into my VB cum VH commodore and am wishing to cam up the beast. Has any one done, or know of  a cammed up v6, how it went, what profile cam etc.Also, how do the standard injectors cope with extra work, and what can they be replaced with if necessary? As a matter of course, the computer will have a custom chip specifically burned for the vehicles specs.     Wayne --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------