Re: OFF TOPIC: V6 Injectors & Cams

[Wayne Woodall]

i believe the vt & vx computers are different from the earlier ones does that sound right. A guy my brother works with, reprograms delco chips but has some hassles with vt/vx computers. Feel free to email the maps, Vr to Vx to [EMAIL PROTECTED] . That would be great. We are currently searching for information on what cams work with the v6's, i would like to crank up the compression and hav a cam around 35/75 duration. It has to lump. cant have it sounding like a shopping trolley. I have been quoted ~$400 for cam & ~$600 for chip. The chip includes putting the car on a dyno, tuning it while running the efi off a laptop and burning a chip to suit the cars specs.     Wayne   ----- Original Message ----- From: mark krawczuk To: [EMAIL PROTECTED] Sent: Thursday, September 26, 2002 8:48 AM Subject: Re: OFF TOPIC: V6 Injectors & Cams hi, i have done a v6 commodore auto). i got a cam and chip package from  Mc claren motor engineering  ( they are on  port road, adelaide) for  AROUND the $400 mark.  the cam and chip were on a exchange basis.  the cam didnt seem  that hot , i  DEFINATELY would have gone for one hotter. the thing is , didnt go  much better , cause i found out that the rest of the engine was  a bit knackered.   might pay to ask mc claren , what the specs are and get one hotter,  plus, a ported out throttle body ( i ported out  and polished a throttle body on my vl  commodore,  its easy to do, i`ve seen a throttle body ( not aftermarket one) at  outlaw speed equipment in adelaide , with the  same  porting etc ....done as mine and they wanted $400, ( well, i really reckon it was a lot more than that  come to think  of it..)    i have rom maps for  vn to vx commodore , if ya interested in doing your own remapping......      mark k ----- Original Message ----- From: Wayne Woodall To: [EMAIL PROTECTED] Sent: Wednesday, September 25, 2002 11:06 PM Subject: OFF TOPIC: V6 Injectors & Cams Listers,     Ok, I am retrofitting an Ecotec V6 into my VB cum VH commodore and am wishing to cam up the beast. Has any one done, or know of  a cammed up v6, how it went, what profile cam etc. Also, how do the standard injectors cope with extra work, and what can they be replaced with if necessary?   As a matter of course, the computer will have a custom chip specifically burned for the vehicles specs.       Wayne --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ --------------------------------------------------------------------- --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/membersozdat@datascribe.com.au/ ---------------------------------------------------------------------