yap i agree with you not to use silicone.try making a gasket urself mate it works
better then the original one at times.
-----Original Message-----
From: Geordie [mailto:[EMAIL PROTECTED]
Sent: Thursday, January 29, 2004 7:18 PM
To: [EMAIL PROTECTED]
Subject: RE: EFI L series manifold gasket
Importance: High
Did you use that sticky gooey loctite rubbish?
I'm thinking a good fat bead of silicone, leave the bolts loosw & let it sit
till it's nearly dry and then do it up slowly so you've got a big chunky
bead on it.
Or you could go buy the L18 one like someone suggested. :D
I love my silicone gun... Mwaahahahah.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Andrew
Greenbury
Sent: Thursday, 29 January 2004 5:13 PM
To: [EMAIL PROTECTED]
Subject: RE: EFI L series manifold gasket
Hi Geordie,
Ive tried gasket sealant but it didn't work :(
Andrew
> Bodgy I know, but would silicone fix it?
>
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Andrew
> Greenbury
> Sent: Thursday, 29 January 2004 2:47 PM
> To: [EMAIL PROTECTED]
> Subject: EFI L series manifold gasket
>
>
> Hi everyone,
>
> Im having trouble getting my recently installed L18 efi manifold to seal
> - I used an L20 mani gasket with the top port section cut out for the
> injectors. This appears to not leave much material to seal, and it
> seems to be leaking a bit around the top port section.
>
> What gasket has other people used on efi L4s, or should I make a
> custom gasket for the application?
>
> Thanks for any help,
> Andrew
>
>
>
>
>
>
>
>
--membersozdat-------------------------------------------------------
OZDAT Mailing List Please Note:-
Send (un)subscribe requests to [EMAIL PROTECTED]
Send submissions to [EMAIL PROTECTED]
No unauthorised redistribution of this email
http://www.ozdat.com/ozdatonline/index.htm
http://www.ozdat.com/ozdatonline/listindex.html
http://www.mail-archive.com/[EMAIL PROTECTED]/
---------------------------------------------------------------------
This email and any files transmitted with it are confidential and intended solely for
the use of the individual or entity to whom they are addressed. If you have received
this mail in error, please notify the System Administrator. Please note that any views
or opinions presented in this mail are solely those of the author and do not
necessarily
represent those of the Institute. Finally the recipient should check this mail and any
attachment for the presence of viruses. FIT has a virus detection in place and makes
every reasonable effort to ensure that this message is free from viruses. FIT accepts
no liability for any damage caused by any virus transmitted by this mail
